Epson 1815p - PowerLite XGA LCD Projector Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 27 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 1815p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Bedieningshandleiding (47 pagina's), Snelle installatie (2 pagina's), Gebruikershandleiding (1 pagina's), Functiehandboek (5 pagina's), Software Handleiding (2 pagina's), Conformiteitsverklaring (4 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (45 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Pagina afdrukken

Epson 1815p - PowerLite XGA LCD Projector Gebruikershandleiding

❏ Ad Hoc mode (computer-to-computer mode) lets you

connect just one computer to the projector at a time; it's easy

to set up, and the only equipment you need is a computer

with a wireless (802.11g, 802.11b, or 802.11a) network card

or adapter, or a Macintosh with an AirPort

Extreme card. When you connect to the projector in this

mode, your connection to other wireless networks or devices

is broken; you can connect to the projector only.

❏ Access Point mode (infrastructure mode) lets multiple

computers access the projector at the same time and easily

trade off control of the projector. To use Access Point mode,

you need a wireless (802.11a, 802.11b, or 802.11g) access

point or an AirPort Extreme (or AirPort) base station, and

one or more computers with wireless network cards or

adapters.

Follow the instructions below for the mode you want to use.

Note: To connect to the projector over a wireless network, your

computer must be running Windows 2000 or XP. Your Mac must

be running Mac OS X 10.3 or later.

Access Point mode (infrastructure mode) is required to achieve

transfer speeds up to 54Mbp/s on an 802.11a/g network. Ad Hoc

mode (computer-to-computer mode) limits network connections to

11Mbp/s. This is a standard specification of 802.11g networking.

Using Ad Hoc Mode

To use Ad Hoc (computer-to-computer) mode, adjust your

projector and wireless card or adapter settings as described in

this section.

Configuring the Projector

1. Press the

button, then choose

Enter

2. Choose

Network Configuration

3. Choose

and press

Wireless LAN

or AirPort

and press

Network

and press

Enter

You see this screen:

4. Make sure

is selected for the Connection mode. If

Quick

not, use the

pointer button on the remote control to

highlight

, then press

Quick

5. If your network is using 802.11a, use the

on the remote control to highlight

to select it.

6. If your computer's network card supports an SSID or ESSID

name (see page 12), highlight the

, and enter a name. Note that the ESSID is case-

Enter

sensitive (if you enter the name in uppercase on the

projector, you must type it the same way on the computer

connecting to the projector).

Use the

pointer button to select individual letters; then

press

to input a character. To add a blank space or to

Enter

navigate backward and forward through the input text,

highlight the arrows and press

settings or capital letters, highlight the option and press

. When you're done, highlight

Enter

7. When you're done making these settings, select

select

Setup complete

you want to save the changes. Press

system.

Now you're ready to set up your computer to project wirelessly.

Go to "Configuring the Network Settings for Windows" in the

next section, or "Configuring the Network Settings for

Macintosh" on page 12.

3/08

PowerLite 1810p/1815p

to select it.

Enter

pointer button

, then press

802.11a

text box, press

ESSID

. To toggle symbol

Enter

and press

Finish

Return

, and then select

to confirm that

Yes

to exit the menu

PowerLite 1810p/1815p

Enter