Epson 1815p - PowerLite XGA LCD Projector Product ondersteunings bulletin - Pagina 8

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 28 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 1815p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Bedieningshandleiding (47 pagina's), Gebruikershandleiding (27 pagina's), Snelle installatie (2 pagina's), Gebruikershandleiding (1 pagina's), Functiehandboek (5 pagina's), Software Handleiding (2 pagina's), Conformiteitsverklaring (4 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (45 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

EPSON

Date:

06/06/2005

PSB.2005.06.001

PSB #:

N/A

Reference:

Powerlite 8300/8300 with EasyMP.net/9300 series Projectors

Product(s):

Subject:

Filter-Cleaning Procedures

This bulletin was created to inform users about the filter-cleaning procedures necessary for

maintaining proper airflow and reducing the potential for overheating.

Reason:

The PowerLite 8300 and 9300 series projectors have five (5) filters that must be cleaned on a regular

basis. Cleaning the filters is critical to maintaining proper airflow inside the projector and reducing

possible overheating issues. Incomplete or infrequent filter-cleaning maintenance can cause one or

more filters to accumulate excessive dust over time. This can inhibit proper airflow so that the

projector begins to overheat during operation and eventually shut down. The next section provides

information on the location of the filters on the projector, cleaning instructions and recommended

maintenance schedules.

Action:

The following filters should be cleaned after every 100 hours of use. For dusty environments, filter

cleaning should be performed more frequently.

1) Wire mesh filter (inside lamp housing shutter):

Hold shutter open and use a computer vacuum to remove dust.

RODUCT

UPPORT

ULLETIN

Page 1 of 3

PSB.2005.06.001

Originator: JD

Authorization:

Total Pages: 3