Siemens 3SB5 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens 3SB5. Siemens 3SB5 14 pagina's.
Pagina afdrukken
1
1
2
2
3
3
4
4
5
7
Step 1: Pass the Actuator (1/6) through the Cutout from the front into the Holder (3)
Step 2: Lock the Actuator (1/6) with Holder (3) by turning it Clockwise
Step 3: Fix Holder (3) by tightening two pressure screws (4) of the holder (3) to make it both
vibration-proof and twist proof (Maximum Tightening torque = 0.8 Nm)
Step 4: Fit the Contact Block (5) or Lamp holder (7) by snapping into the Slots of Holder (3)
DETAIL A
NOTE:
1NC/2NC Contact Block (5) should be assembled only in slot "12"
(See DETAIL A) of Holder (3).
1NO/2NO Contact Block (5) should be assembled only in slot "43"
(See DETAIL A) of Holder (3).
Lamp Holder (7) / Integrated LED (10) illumination modules should be
assembled only in slot "56" (See DETAIL A) of the Holder (3).
2
1
2
3
1
3
4
3
2
2
3
6
6
3
4
3
2
DETAIL A
10