Cisco 6800 Series Hardware-installatie - Pagina 3

Blader online of download pdf Hardware-installatie voor {categorie_naam} Cisco 6800 Series. Cisco 6800 Series 20 pagina's. Ip phone, multiplatform phones
Ook voor Cisco 6800 Series: Snelstarthandleiding (3 pagina's), Gebruikershandleiding (8 pagina's), Onderhoudshandleiding (8 pagina's), Gebruikershandleiding (14 pagina's), Handleiding voor probleemoplossing (12 pagina's), Snelstarthandleiding (4 pagina's), Gebruikershandleiding (22 pagina's), Snelstarthandleiding (4 pagina's), Installatiehandleiding (39 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Pagina afdrukken
Cisco 6800 Series Hardware-installatie
Hardware Installation
Handset Registrations
You can have up to 20 handsets registered on 110 Single-Cell Base Station and 30 handsets registered on 210
Multi-Cell Base Station. However, the number of active calls the base station can handle is limited by the
codec.
Table 2: Number of Active Calls Supported for one 110 Single-Cell Base Station and one 210 Multi-Cell Base Station
Band
Concurrent Narrowband
Concurrent Secure Narrowband
Wideband
Table 3: Maximum Number of Active Calls Supported for many 210 Multi-Cell Base Stations
Band
Concurrent Narrowband
Concurrent Secure Narrowband
Wideband
Note
If a user turns on Push to Talk, the base station may reduce the supported number of active calls.
Note
If you use repeaters, the base supports less active handsets.
The single cell and multicell deployments have different maximum numbers of handsets and base stations.
For more information, see
Single Cell and Multicell Networks
You can set up either a single cell system or a multicell system.
A single cell system consists of either one 110 Single-Cell Base Station with up to 20 handsets or 210 Multi-Cell
Base Station with up to 30 handsets. You can also use up to 6 of the 110 Repeaters with 110 Single-Cell Base
Station and up to 3 of the 110 Repeaters with 210 Multi-Cell Base Station for improved radio coverage. The
following diagram shows a single cell network with one base station.
• Ensure that the repeater is within the range of the base station. Each base station has a range of up
to 984 feet (300 meters) outdoors and a range of 164 feet (50 meters) indoors.
110 Single-Cell Base Station
10
8
5
Single Cell and Multicell Networks, on page
210 Multi-Cell Base Station
10
8
5
Multicell System
2000
2000
1250
3.
Hardware Installation
Handset Registrations
3