Cisco 6945 Series Installatiehandleiding - Pagina 15

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco 6945 Series. Cisco 6945 Series 16 pagina's. 6900 series
Ook voor Cisco 6945 Series: Gegevensblad (5 pagina's), Snelle referentie (2 pagina's), Release-opmerkingen (18 pagina's), Gebruikershandleiding (10 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (8 pagina's), Administratiehandleiding (14 pagina's), Kenmerken (29 pagina's), Snelstarthandleiding (2 pagina's), Snelle installatie en gebruikershandleiding (12 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (2 pagina's), Instructies (3 pagina's), Snelstarthandleiding (2 pagina's), Functies Handleiding (4 pagina's), Gebruikershandleiding (34 pagina's), Snelle installatiehandleiding (12 pagina's), Snelle referentiehandleiding (2 pagina's)

Pagina afdrukken
Cisco 6945 Series Installatiehandleiding
Chapter
Table 3-2
Hardware Test
Power is Ready
Flash is Accessible
RAM Test Successful
Ethernet Test Successful
2.
3.
4.
If the phone successfully passes through these stages, it has started up properly. If the phone does not
start up properly, see the

Configuring Startup Network Settings

If you are not using DHCP in your network, you must configure these network settings on the
Cisco Unified IP Phone after installing the phone on the network:
•
•
•
•
•
Collect this information and see the instructions in
Unified IP Phone."

Configuring Security on the Cisco Unified IP Phone

The security features protect against several threats, including threats to the identity of the phone and to
data. These features establish and maintain secure communication streams between the phone and the
Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
For more information about the security features, see the
Unified IP Phones" section on page
Security Guide.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
LED Diagnostic Status
The screen displays the Cisco Systems, Inc., logo screen.
These messages appear as the phone starts up.
Phone not registered
–
The home screen displays:
Current date and time
–
Primary directory number
–
Additional directory numbers and speed dial numbers, if configured (Only on Cisco Unified IP
–
Phone 6961)
Softkeys
–
"Resolving Startup Problems" section on page
IP address
IP subnet information
IPv6 addresses
TFTP server IP address
You also may configure the domain name and the DNS server settings, if necessary.
MWI
Hold
On
On
—
On
—
—
—
—
Chapter 4, "Configuring Settings on the Cisco
"Understanding Security Features for Cisco
1-14. Also, refer to Cisco Unified Communications Manager
Configuring Startup Network Settings
Mute
Speaker
On
On
On
On
On
On
—
On
9-1.
3-15