Epson 755c - PowerLite XGA LCD Projector Product ondersteunings bulletin - Pagina 30

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 30 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 755c - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Specificatieblad (2 pagina's), Onderdelen (26 pagina's), Bedieningshandleiding (47 pagina's), Door gebruiker vervangbare onderdelen (1 pagina's), Snelle installatie (2 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Epson 755c - PowerLite XGA LCD Projector Product ondersteunings bulletin
EPSON
Date:
07/16/2003
PSB.2003.07.001
PSB #:
N/A
Reference:
Product(s):
PowerLite – 735c / 7850p / 8300i (with Easy-MP.Net option installed)
Epson Wireless Projectors and using dual mode 802.11b/g or 802.11b/a
Subject:
wireless PC Cards
This bulletin was created to inform you of issues that have been reported when accessing Epson
Wireless Projectors using dual mode 802.11b/g or 802.11b/a wireless PC Cards, either in ad-hoc
mode or through dual mode Access Points.
Reason:
The dual mode PC Cards and Access Points tend to have interference and compatibility
problems when operating in dual mode.
Solution:
For optimal performance results with Epson 802.11b wireless products, it is recommended that
single/native 802.11b mode be used.
If your dual mode wireless PC Card and/or Access Point can be configured to support the
802.11"b" mode only, set it to 802.11"b" only.
Note: In some cases it is not enough to disable dual mode and set the mode to 802.11"b" only;
on some dual mode PC cards (802.11b/g or 802.11b/a) the "A" and "G" modes cannot be turned
off.
P
S
RODUCT
UPPORT
B
ULLETIN
Page 1 of 1
Originator: TC
Authorization:
Total Pages: 1