Cisco 6961 - Unified IP Phone Standard VoIP Referentiehandleiding - Pagina 2

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 4 pagina's. Unified communications manager express
Ook voor Cisco 6961 - Unified IP Phone Standard VoIP: Gegevensblad (5 pagina's), Release-opmerkingen (18 pagina's), Gegevensblad (5 pagina's), Gebruikershandleiding (38 pagina's), Administratiehandleiding (14 pagina's), Installatiehandleiding (16 pagina's), Kenmerken (29 pagina's), Administratiehandleiding (19 pagina's), Handleiding voor gebruik (6 pagina's), Snelle referentiekaart (2 pagina's), Snelle referentiehandleiding (2 pagina's)

Reference Guide for Cisco 6900 Series Phones

How To...

Directions...

Place a Call

Internal and External:

1. Lift handset or press the Speaker button.

2. Dial the 10-digit number.

To make a second call:

1. While on active call, press Hold soft key to hold first call.

2. Press New Call soft key. After dial tone, dial 10-digit number.

To pre-dial:

1. With handset on-hook, dial the 10-digit number.

2. Press the Dial soft key, and pick up the handset.

To correct a dialing error, press the < (backspace) soft key to erase.

Soft Keys

The display is dynamic and changes according to your phone activity. Available features appear across the

bottom of your display in groups of four. These features are soft key labels. The phone may have more than

four available features. To view additional features, press the More soft key. To use these features, press the

corresponding soft key located directly below the features.

Navigation Bar

The Navigation Bar allows scrolling through menus by pressing up or down arrow.

(with Select button)

When handset is on-hook, press UP arrow to display phone numbers from your Placed Call log, or press the

DOWN arrow to view a listing of calls.

Use center Select button to choose the highlighted display item.

Hold and Resume

To Hold: While connected, press the Hold button. Note the display icon indicating the call is on hold

(paused).

To Resume: Press the Resume soft key, or the Blinking Line button to return to the call.

More than one call on hold: Use the Navigation Bar to highlight the call. Then, press Resume.

Call Waiting

While on a all, a call waiting tone (single beep) is heard. The display will briefly provide call information of

second incoming caller, and the line button will flash.

To answer second call or toggle between calls, press Blinking Line button. First call automatically put on

hold.

To end a call: While connected (highlighted in display), press the End soft key or hang up.

PickUp

To answer call in Your PickUp group:

1. Lift handset.

2. Press PickUp soft key to be connected to the incoming call:

www.its.ny.gov/telecommunications

a. To answer call, press Answer soft key.

b. To divert to your voicemail, press Divert soft key.

c. To send call back to original called number, let call ring.

Cisco

6900