Cisco 7811 Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 7811. Cisco 7811 20 pagina's. Mpp phones
Ook voor Cisco 7811: Handmatig (27 pagina's), Masterhandleiding voor firmwaremigratie (31 pagina's), Aan de slag (6 pagina's), Installatiehandleiding (39 pagina's), Herconfiguratiehandleiding (2 pagina's), Aan de slag (2 pagina's), Snelle referentiekaart (2 pagina's), Snelstarthandleiding (2 pagina's)

Your Phone

Before you begin

Your administrator must enable the PC port in Cisco Unified Communications Manager before you can use

it.

Procedure

Step 1

Connect the phone SW port to the LAN with an Ethernet cable.

Step 2

Connect your computer to the phone PC port with an Ethernet cable.

Connect with Activation Code Onboarding

If your network has been configured to support this feature, then you can use Activation Code Onboarding

to connect to your company's phone network.

Enter an Activation Code

Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.

Contact your administrator if you don't know your code or if you need a new one.

Procedure

Step 1

Enter your activation code on the activation screen.

Step 2

Press Submit.

Connect to Expressway

You can use Mobile and Remote Access Through Expressway to connect into your corporate network when

you are working away from your office. Because your phone does not have a TFTP address configured, the

phone displays a Welcome screen to begin the sign-in process.

Before you begin

If you have been using your phone at the office or with a VPN, reset your service mode before you connect

to Expressway.

If you need to connect to Mobile and Remote Access Through Expressway on-premise, restart your phone

and press Select when prompted.

Procedure

Step 1

Enter your activation code or service domain on the Welcome screen and press Continue.

Step 2

Enter your username and password.

Step 3

Press Submit.

Connect with Activation Code Onboarding

Your Phone