Epson 7850p - PowerLite XGA LCD Projector Bedieningshandleiding - Pagina 26

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Epson 7850p - PowerLite XGA LCD Projector. Epson 7850p - PowerLite XGA LCD Projector 36 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 7850p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Gebruikershandleiding (12 pagina's), Vervangende onderdelen (1 pagina's), Bedieningshandleiding (47 pagina's), Product ondersteunings bulletin (30 pagina's), Installatiehandleiding (5 pagina's), Snelle installatie (2 pagina's), Brochure & specificaties (2 pagina's), Handleiding productinformatie (25 pagina's), Technisch overzicht (7 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Monitoring window layout

Displaying projector properties

Right-click on a projector icon in "Grouping view" or "Detail list view"

and select "Property".

In your web browser, you can check a transmission log of content such as

what has been controlled by the EMP Monitor, projector errors. You can

delete logs once you have checked them.

TIP

When "Log output" is set to "On" at "Environment setup" in the

"Tool" menu, transmission logs are stored. The default setting is

"Off".

Displays the

projector firmware

PROCEDURE

version.

Select "Log" - "show" from the "View" menu.

The web browser will open and the communication logs up until that

time will be displayed.

PROCEDURE

Select "Log" - "Delete" from the "View" menu.

When the confirmation message is displayed, click [OK].

All logs will be deleted and details of EMP Monitor control

operations and details of projector errors from that point onward will

be recorded in a new log.