Siemens CM633GB 1M Series Gebruikershandleiding en installatie-instructies - Pagina 17
Blader online of download pdf Gebruikershandleiding en installatie-instructies voor {categorie_naam} Siemens CM633GB 1M Series. Siemens CM633GB 1M Series 40 pagina's.
Pagina afdrukken11.3 Microwave combination
To reduce the cooking time, you can use certain types
of heating in combination with the microwave.
Possible combinations include:
¡ 90 watts + 4D hot air
¡ 90 watts + Hot air grill
¡ 180 watts + Hot air grill
¡ 360 watts + Hot air grill
Setting the microwave combination
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡
¡ → "Cookware and accessories with microwave",
Page 15
1.
Press
.
2.
In the operating modes menu, select "Microwave
combination" using the rotary selector.
3.
Press .
a "Type of heating with microwave output setting",
"Temperature" and "Cooking time" recommenda-
tions are displayed.
4.
Use the rotary selector to set the type of heating
with the microwave output setting.
5.
Press .
6.
Use the rotary selector to set the temperature.
7.
Press .
12 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
12.1 Cookware
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Note: For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for mi-
crowave use.
→ "Cookware and accessories with microwave",
Page 15
8.
Use the rotary selector to set the cooking time.
9.
Press
to start the operation.
a The appliance starts to heat and the time starts to
count down.
a When the cooking time has elapsed, a signal
sounds and the duration is at 0:00 on the display.
10.
Once the cooking time has elapsed:
Press
to silence the audible signal manu-
‒
ally.
If necessary, set another combination.
‒
When the food is ready, press
‒
appliance off.
Changing the temperature and cooking time
Once the MicroCombi operation has started, you can
change the temperature and cooking time directly.
1.
Press or to change the temperature or the cook-
ing time.
2.
Use the rotary selector to change the temperature
or the cooking time.
a The change is applied immediately.
Changing the type of heating with microwave output
setting
If you change the type of heating, the temperature also
changes and the cooking time is reset.
1.
Press
to pause operation.
2.
Press to switch to the types of heating.
3.
Use the rotary selector to set the type of heating
with the microwave output setting.
4.
Press
to resume operation.
12.2 Settings for the dishes
To make the dishes perfectly, the appliance uses differ-
ent settings.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food.
Information on the settings
Once you start a dish, the display shows relevant
information for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
In order to obtain an optimal cooking result, you must
also set the weight. Unless otherwise indicated, set the
total weight for your dish. You can set the weight only
in the intended range.
Microwave dishes
The appliance activates the microwave automatically
for certain dishes. This significantly reduces the cook-
ing time.
Take note of the information for the microwave.
→ "Microwave", Page 15
Dishes en
to switch the
17