Epson 826W - PowerLite WXGA LCD Projector Handleiding voor snelle installatie

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Epson 826W - PowerLite WXGA LCD Projector. Epson 826W - PowerLite WXGA LCD Projector 9 pagina's. Epson powerlite 85/825/826w
Ook voor Epson 826W - PowerLite WXGA LCD Projector: Gebruikershandleiding (42 pagina's), Specificaties (6 pagina's), Bedieningshandleiding (47 pagina's), Snelle installatie (4 pagina's), Gebruikershandleiding (1 pagina's), Specificaties (2 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (12 pagina's), Aan de slag handleiding (9 pagina's), Conformiteitsverklaring (4 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (22 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Installatie Handboek (10 pagina's), Installatie Handboek (3 pagina's)

PowerLite

85/825/826W

Quick Setup

Before using the projector, make sure you read the safety instructions in the

User's Guide on your projector CD.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projector's Computer1 or Computer2 port, and

the other end to your computer's

monitor port. If you are using a

notebook, switch it to external display. You can also connect an audio cable or

microphone.

Computer USB Port

Connect a computer (Windows

2000 or later only) using the USB cable that

came with the projector.

Connect the square end of the USB cable to the projector's

Type B

(square) USB port. Connect the flat end of the cable to any USB port on your

computer. You can also connect an audio cable or microphone.

Follow the on-screen instructions to install the Epson USB Display software.

Then press the USB button on the remote control.

Network (LAN)

Connect the projector to your network using an Ethernet

cable. See "Project

Over the Network" on the back of this sheet for more information.

*411676200*