Cisco 7841 Snelle referentiehandleiding - Pagina 2

Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Cisco 7841. Cisco 7841 4 pagina's. Classroom phone
Ook voor Cisco 7841: Release-opmerkingen (16 pagina's), Snelstarthandleiding (2 pagina's), Snelle referentiehandleiding (4 pagina's), Snelle referentie (4 pagina's), Snelle installatie en gebruikershandleiding (12 pagina's), Referentiehandleiding (11 pagina's), Snelle referentiehandleiding (7 pagina's), Snelle referentiehandleiding (7 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (2 pagina's), Handmatig (27 pagina's), Masterhandleiding voor firmwaremigratie (31 pagina's), Handmatig (43 pagina's), Snelstarthandleiding (2 pagina's), Installatiehandleiding (39 pagina's), Gebruik (4 pagina's), Snelle gebruikershandleiding (2 pagina's), Handmatig (7 pagina's), Handmatig (20 pagina's), Functies Handleiding (4 pagina's), Herconfiguratiehandleiding (2 pagina's), Gebruikershandleiding (5 pagina's), Snelle referentiekaart (2 pagina's), Snelle installatiehandleiding (12 pagina's), Snelstarthandleiding (2 pagina's), Beknopte handleiding (3 pagina's), Snelle referentiekaart (2 pagina's), Snelle referentiekaart (2 pagina's), Snelstarthandleiding (2 pagina's), Snelle referentiehandleiding (3 pagina's)

Cisco 7841 Snelle referentiehandleiding
Resume Held
Call
Transfer Calls
You may perform a Blind
Transfer (call is NOT
announced) or a Warm
Transfer (call is
announced)
Shared Lines
Conference Call
Maximum of 8
participants
Park
Allows the call to be
retrieved from another
Cisco phone
Park Retrieve
From any Cisco phone
Mute Call
Applies to all modes:
handset, headset, and
speaker
Divert to Voice
Mail
Forward Calls
Forwards prime/first line
on phone
Choose one of the following:
Press the flashing green Line Button
Press the Hold Button
Press the Resume soft key
With call in progress, press the Transfer Button
Note: This puts call on hold and provides dial tone
Dial desired destination (Optional: Announce the call)
Press the Transfer Button
To Cancel A Transfer (before completion)
Press the Cancel soft key (cancels connection to transferee)
Press the Resume soft key or press the flashing green Line Button
caller
If you share a line (extension appears on multiple phones)
Either you or your co-worker may answer a ringing call
When co-worker is using the shared line, the shared Line Button is lit red
When co—worker has a call on hold, the shared Line Button will flash red
With call in progress, press the Conference Button
on temporary hold and dial tone is heard
Dial the desired internal or external number and announce the conference call
Press the Conference Button
Repeat above steps to add additional participants
With call in progress, press the Park soft key
Note the Call Park Code (i.e. XXXXX) displayed on the screen
Hang up receiver
Lift receiver and dial assigned Call Park code
Converse
With call in progress, press the Mute Button
Red light indicates call is muted
Hear incoming call
Without answering call, press the Divert soft key
Call is immediately diverted to voice mail
Divert Call while in an existing conversation (call is sent to voice mail):
Hear call waiting tone
Press Navigation Button
Press the Divert soft key
Press the FwdAll soft key (no dial tone)
Enter the desired forwarding number or press the Message/Voice Mail Button
forward your calls to voice mail
Cancel Call Forwarding
Press the FwdOFF soft key
to complete transfer
to create the conference
down to highlight incoming call
to return to
Call is automatically placed
to