Cisco 7861 Release-opmerkingen - Pagina 10

Blader online of download pdf Release-opmerkingen voor {categorie_naam} Cisco 7861. Cisco 7861 16 pagina's. Mpp phones
Ook voor Cisco 7861: Snelstarthandleiding (2 pagina's), Snelle referentiehandleiding (4 pagina's), Snelle referentie (4 pagina's), Referentiehandleiding (11 pagina's), Handmatig (27 pagina's), Masterhandleiding voor firmwaremigratie (31 pagina's), Installatiehandleiding (39 pagina's), Handmatig (20 pagina's), Herconfiguratiehandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Pagina afdrukken
Cisco 7861 Release-opmerkingen
Open Caveats
Table 2: Open Caveats for Firmware Release 10.1(1)SR1
Identifier
CSCuh34236
CSCuj16464
CSCuj25165
CSCuj52759
CSCuj53400
CSCuj73412
CSCuj93181
CSCuj96094
CSCul01193
CSCul19064
CSCul19068
CSCul28593
CSCun07043
CSCun30345
CSCun35603
CSCun35740
CSCun38492
CSCun45084
CSCun45099
CSCun45165
CSCun45175
CSCun45190
CSCun46787
CSCun46904
Cisco IP Phone 7821, 7841, and 7861 Release Notes for Firmware Release 10.1(1)SR1
6
Cisco IP Phone 7821, 7841, and 7861 Release Notes for Firmware Release 10.1(1)SR1
Description
Display of phone is incorrect when PC port/SW port is 10/10
Monitoring phone not send RTCP
Highlighted backgroound has afterimage when switch among calls on 7861
IPv6 mode phone fail to register if CUCM v4/v6 hostname are different
No message indicate for 2nd incoming call if phone is in app menu
one log recorded when the call is transferred with translation pattern
Group pickup; the call log should not recorded group unmber
DND beep not played when on hook from handset
Phone can't add participant by PD in conference/transfer
Press the update SK and then press the back SK navigation har
It will flash secure icon one time after answer a call
The line with '#' in the DN still display on phone's ui in srst mode
DN displaying wrongly during transfer in 7841 phone Model
78xx :line Led behavior wrong if phone has incoming and hold revert call
missed call number not increased accordingly
78xx can't access VM when setting media using ipv6 prefer.
Kate overlap the SK
incoming call toast behavior not consentaneous
extra cursor on 7861 when dial quick after cancel previous dialing
Call is dropped unexpectedly after pressing resume softkey
local/remote ipv6 addr under stream info error in webpage
arabic/Hebrew:v6 gateway/v6 dns/tftp v6 address orientation is wrong
7861:UI still display missed calls state if remote call in hold
Line LED not changed to green for active call if remote hold there