Cisco 7861 Release-opmerkingen - Pagina 7

Blader online of download pdf Release-opmerkingen voor {categorie_naam} Cisco 7861. Cisco 7861 16 pagina's. Mpp phones
Ook voor Cisco 7861: Snelstarthandleiding (2 pagina's), Snelle referentiehandleiding (4 pagina's), Snelle referentie (4 pagina's), Referentiehandleiding (11 pagina's), Handmatig (27 pagina's), Masterhandleiding voor firmwaremigratie (31 pagina's), Installatiehandleiding (39 pagina's), Handmatig (20 pagina's), Herconfiguratiehandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Cisco IP Phone 7821, 7841, and 7861 Release Notes for Firmware Release 10.1(1)SR1

Important

For information on the Cisco Unified Communications Manager Device Packs, see

US/docs/voice_ip_comm/cucm/compat/devpack_comp_mtx.html.

Install Firmware Release on Cisco Unified Communications Manager

Before using the Cisco IP Phone Firmware Release 10.1(1)SR1 with Cisco Unified Communications Manager,

you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.

Procedure

Step 1

Go to the following URL:

http://software.cisco.com/download/navigator.html?mdfid=284883944&i=rm

Step 2

Choose Cisco IP Phones 7800 Series.

Step 3

Choose your phone type.

Step 4

Choose Session Initiation Protocol (SIP) Software.

Step 5

In the Latest Releases folder, choose 10.1(1)SR1.

Step 6

Select one of the following firmware files, click the Download Now or Add to cart button, and follow the

prompts:

• cmterm-78xx.10-1-1SR1-4.cop.sgn

Note

Step 7

Click the + next to the firmware file name in the Download Cart section to access additional information about

this file. The hyperlink for the readme file is in the Additional Information section, which contains installation

instructions for the corresponding firmware.

Step 8

Follow the instructions in the readme file to install the firmware.

If a Cisco Unified Communications Manager is not available to load the installer program, the following .zip

files are available to load the firmware.

• cmterm-78xx.10-1-1SR1-4.zip

Firmware upgrades over the WLAN interface may take longer than upgrades using a wired connection.

Upgrade times over the WLAN interface may take more than an hour, depending on the quality and bandwidth

of the wireless connection.

If your Cisco Unified Communications Manager does not have the required device pack to support this

firmware release, the firmware may not work correctly.

If you added the firmware file to the cart, click the Download Cart link when you are ready to

download the file.

Cisco IP Phone 7821, 7841, and 7861 Release Notes for Firmware Release 10.1(1)SR1

Install Firmware Release on Cisco Unified Communications Manager

http://www.cisco.com/en/