Epson 835p - PowerLite XGA LCD Projector Productinformatie - Pagina 9

Blader online of download pdf Productinformatie voor {categorie_naam} Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 21 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 835p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Snelle installatie (4 pagina's), Bedieningshandleiding (47 pagina's), Product ondersteunings bulletin (30 pagina's), Aanvullende handleiding (1 pagina's), Brochure & specificaties (4 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Technisch overzicht (7 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Specificatieblad (4 pagina's)

Pagina afdrukken

Epson 835p - PowerLite XGA LCD Projector Productinformatie

This automatically resets the projector's tracking, sync,

resolution, and position settings.

If vertical bands appear in the projected image and pressing

the

button doesn't correct the problem, hold down the

Auto

button on the projector's control panel while pressing

Shift

either the

or the

Tracking +

If the image appears fuzzy or flickers and pressing the

button doesn't correct the problem, hold down the

button while pressing either the

the projector.

Auto button

button.

Tracking -

Shift

button on

Sync +

Sync -

Shutting Down the Projector

When you've finished using the projector, follow the

recommended procedure to shut it down. This extends the life

of the lamp and protects the projector from possible

overheating.

Note: You can set the projector to automatically turn off the

projector lamp and enter "sleep mode" when it has not received

any signals for 30 minutes. This conserves electricity, cools the

projector, and extends the life of the lamp. To start projecting

again, press the P

projector, unplug the power cord. To turn off sleep (standby)

mode, see the User's Guide.

1. Turn off any equipment plugged into the projector.

2. To turn off the projector, press the red P

on the projector or remote control.

You see a confirmation message. (If you don't want to turn

the projector off, press any other button.)

3. Press the P

Auto

twice, the lamp is turned off, and the

orange for about 30 seconds as the projector cools down.

After the projector has cooled, the orange light stays on and

the exhaust fan shuts off.

To turn the projector on again, wait until the orange light

stops flashing. Then press the P

4. If you extended the adjustable front foot, press up on the

blue foot release lever to retract it.

5. Replace the lens cap and unplug the power cord.

Caution: Turn the projector off when not in use. Continuous

24-hour-a-day use may reduce the projector's overall life.

6. If you're using a remote control, set its

OFF

10/04

Epson PowerLite 835p

button. If you are done using the

Power

button again. The projector beeps

Power

Epson PowerLite 835p

button

Power

Power button

light flashes

button.

switch to

ON/OFF