Epson 835p - PowerLite XGA LCD Projector Product ondersteunings bulletin - Pagina 38

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 38 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 835p - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Snelle installatie (4 pagina's), Bedieningshandleiding (47 pagina's), Product ondersteunings bulletin (30 pagina's), Aanvullende handleiding (1 pagina's), Brochure & specificaties (4 pagina's), Productinformatie (21 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Technisch overzicht (7 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Specificatieblad (4 pagina's)

EPSON

Date:

07/16/2003

PSB.2003.07.001

PSB #:

N/A

Reference:

Product(s):

PowerLite – 735c / 7850p / 8300i (with Easy-MP.Net option installed)

Epson Wireless Projectors and using dual mode 802.11b/g or 802.11b/a

Subject:

wireless PC Cards

This bulletin was created to inform you of issues that have been reported when accessing Epson

Wireless Projectors using dual mode 802.11b/g or 802.11b/a wireless PC Cards, either in ad-hoc

mode or through dual mode Access Points.

Reason:

The dual mode PC Cards and Access Points tend to have interference and compatibility

problems when operating in dual mode.

Solution:

For optimal performance results with Epson 802.11b wireless products, it is recommended that

single/native 802.11b mode be used.

If your dual mode wireless PC Card and/or Access Point can be configured to support the

802.11"b" mode only, set it to 802.11"b" only.

Note: In some cases it is not enough to disable dual mode and set the mode to 802.11"b" only;

on some dual mode PC cards (802.11b/g or 802.11b/a) the "A" and "G" modes cannot be turned

off.

RODUCT

UPPORT

ULLETIN

Page 1 of 1

Originator: TC

Authorization:

Total Pages: 1