Siemens WM12K268BY Gebruiksaanwijzing en installatie-instructies - Pagina 20
Blader online of download pdf Gebruiksaanwijzing en installatie-instructies voor {categorie_naam} Siemens WM12K268BY. Siemens WM12K268BY 40 pagina's.
Pagina afdrukken
Operating the appliance
en
Childproof lock
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock after starting
the programme.
To
activate/deactivate
lock, press and hold Start/Reload for
approx. five seconds. The E symbol
appears in the display panel.
w lights up: The childproof lock is
■
active.
w flashes: The childproof lock is
■
active and the programme selector
was adjusted. To prevent the
programme from stopping, turn the
programme selector back to the
original programme. The symbol
lights up again.
The childproof lock can remain
Note:
activated until you wish to start the next
programme, even after switching off the
machine.
You must then deactivate the childproof
lock before starting the programme and
activate it again as necessary once the
programme has started.
Adding laundry
After starting the programme, you can
add or remove laundry as required.
To do this, press the Start/
button.
The Start/Reload ! indicator lamp
flashes and the machine checks
whether it is possible to add laundry.
Do not leave the washing
Note:
machine door open for too long when
adding laundry as water from the
laundry may leak out.
If the display panel shows:
the
Both
YES
■
it is possible to add laundry.
20
the childproof
Reload
and ¼ symbols lit up,
A flashing
■
and ¼ light up.
Do not open the door until
YES
A flashing
■
possible to add laundry.
For safety reasons, the washing
machine door remains locked when
the water level or temperature is
high, or while the drum is rotating,
and it is not possible to add laundry.
To continue the programme, press
the
programme continues automatically.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press Start/
1.
Select the other programme.
2.
Press
3.
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
Press Start/
1.
To cool the laundry: Select
2.
Press
3.
For programmes at low temperatures:
Press Start/
1.
Select
2.
!
Press
3.
Programme end during rinse
hold
– – – B appears on the display panel
and the Start/Reload ! button indicator
lamp flashes.
To end the programme, set the
programme selector to B Spin/p Drain
or select a spin speed. Then press the
/Reload ! button.
Start
symbol, wait until
NO
and the ¼ symbols are lit.
symbol, it is not
NO
/Reload ! button. The
Start
Reload
!.
/Reload !. The new
Start
Reload
!
/Reload !.
Start
Reload
!.
or
B Spin
p Drain
/Reload !.
Start
YES
the
both
.
q Rinse
.