Epson AP-60 - Projector Sound Solution Installatiehandleiding - Pagina 25

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson AP-60 - Projector Sound Solution. Epson AP-60 - Projector Sound Solution 28 pagina's. Projector sound solution
Ook voor Epson AP-60 - Projector Sound Solution: Gebruikershandleiding (28 pagina's), Handmatig (5 pagina's), Aansluithandleiding (1 pagina's), Onderdelenlijst (1 pagina's), Brochure & specificaties (4 pagina's), Product ondersteunings bulletin (8 pagina's)

Pagina afdrukken

Epson AP-60 - Projector Sound Solution Installatiehandleiding

Problems Using the Pendant Microphone

Problem

The power light won't come on.

There is no sound.

My voice isn't loud enough.

External audio devices are too

loud

Problems Using the Remote Control

Problem

The system doesn't respond to

the remote control.

The remote control has been lost

or damaged.

Solution

You may need to replace the pendant microphone's batteries (see page 20).

Check to make sure that the pendant microphone's power button is green. If it's red

or not lit, replace the batteries (see page 20).

Make sure the AP-60 is turned on. If the AP-60 doesn't receive an audio signal for 60

minutes, it turns off automatically.

Press the Mute button on the remote control to make sure the sound wasn't muted

or turned off.

Try increasing the volume.

Adjust the Gain control on the pendant microphone to increase the microphone

sensitivity.

Make sure that the pendant microphone is positioned with the black emitter

window facing away from you and is free of obstructions.

Check the connection of the pendant microphone to the AP-60. The light on the

AP-60 should match the channel selected on the remote control.

If you're using more than one microphone, make sure that each microphone is set

to use a different channel.

Check to see if the IR dome sensor's red power light is lit. If it's not, contact your

maintenance department to check the cable connections.

Use the Gain control wheel on the pendant microphone to increase the

microphone sensitivity.

Adjust the master volume.

Adjust the Microphone gain control knob on the AP-60.

Use the Gain control wheel on the pendant microphone to increase the

microphone sensitivity.

Use the volume control on the external audio device to decrease the volume of the

external audio device.

Solution

Make sure you're within about 20 feet of the AP-60. Point the remote control toward

the AP-60.

You may need to replace the remote control's batteries (see page 18).

Turn off nearby equipment that emits infrared energy, such as a radiant room

heater.

Contact Epson for help, see page 26.