Siemens WT45N202GB Handleiding voor installatie en gebruik - Pagina 32

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Siemens WT45N202GB. Siemens WT45N202GB 36 pagina's. Tumble dryer
Ook voor Siemens WT45N202GB: Handleiding voor installatie en gebruik (40 pagina's), Gebruikershandleiding en installatie-instructies (44 pagina's)

Faults and what to do about them

Faults

Drying time too long?

Displayed drying time

changes during drying

process.

Humidity in the room

increases.

Power cut.

* depending on the model

If you cannot rectify the fault yourself by turning the dryer off and on, please

Note:

contact our after-sales service.

Cause/remedy

The fluff filter may be dirty and cause a longer drying time. Clean the fluff fil-

■

ter.

The heat exchanger may be dirty and cause a longer drying time. Clean the

■

heat exchanger.

If the air inlet on the dryer is blocked or not freely accessible, this may

■

increase the drying time. Make sure that the air inlet remains unobstructed.

If the ambient temperature is higher than 35 °C, this may extend the drying

■

time.

Insufficient air circulation in the room may increase the drying time. Venti-

■

late the room.

Not a fault. The dryer recognizes the load and adapts the remaining program

duration.

Not a fault. Make sure the room is sufficiently ventilated.

The drying program is interrupted. Remove the laundry and spread it out, or

restart the program.