Siemens WU12P269HK Gebruikershandleiding en installatie-instructies - Pagina 16

Blader online of download pdf Gebruikershandleiding en installatie-instructies voor {categorie_naam} Siemens WU12P269HK. Siemens WU12P269HK 40 pagina's.

Pagina afdrukken
Positioning and connecting
en
Do not kink or squash the water
■
supply hose.
Do not alter (shorten, cut through)
■
the water supply hose (otherwise its
strength is no longer guaranteed).
Only tighten the screw connections
■
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may become
damaged.
Optimum water pressure in the supply
network
At least 0.1 MPa (1 bar)
Maximum 1 MPa (10 bar)
Notes
When the tap is open, the water flow
■
rate is at least 8 l/min.
If the water pressure is higher than
■
this, a pressure-reducing valve must
be installed.
Connection
Connect the water supply hose to the
tap (26.4 mm = ¾"):
Turn on the tap carefully,
Note:
checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.
16

Water outlet

:
Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot water
(e.g. when draining hot water into a
washbasin).
Do not reach into the hot water.
Caution!
Water damage
If the drain hose slips out of the
washbasin or the connection point
during draining due to high water
pressure, any escaping water may
cause water damage.
Secure the drain hose so that it cannot
slip out.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/fabrics.
Make sure that:
The plug does not block drainage
■
from the washbasin.
The end of the drain hose is not
■
immersed in the drained water.
The water drains away quickly
■
enough.
Notes
Do not kink the water drain hose or
■
put strain on it lengthways.
The height of water outlet placement:
■
Minimum 0cm ~ Maximum 100 cm.