Cisco 7925G - Unified Wireless IP Phone VoIP Handleiding installeren - Pagina 12

Blader online of download pdf Handleiding installeren voor {categorie_naam} Cisco 7925G - Unified Wireless IP Phone VoIP. Cisco 7925G - Unified Wireless IP Phone VoIP 21 pagina's. Wavelink avalanche management console
Ook voor Cisco 7925G - Unified Wireless IP Phone VoIP: Gegevensblad (8 pagina's), Release-opmerkingen (16 pagina's), Gebruikershandleiding (28 pagina's), Accessoire-handleiding (20 pagina's), Accessoire-handleiding (13 pagina's), Administratiehandleiding (19 pagina's), Gebruikershandleiding (10 pagina's), Gebruikershandleiding (16 pagina's), Beknopte handleiding (14 pagina's), Administratiehandleiding (23 pagina's), Administratiehandleiding (14 pagina's)

Phone Power

Charge Phone Battery Using Power Supply

Use the following figure and steps to charge the phone battery quickly.

Figure 4: Charge the Phone Battery

Procedure

Step 1

Lift the mini-USB port cover on the bottom of phone.

Step 2

Swing the port cover to one side.

Step 3

Insert the AC power supply mini-USB connector in the port.

Step 4

Insert the AC plug adapter in the slot on the power supply.

Step 5

Insert the AC power supply in a wall outlet.

The indicator light indicates the charging status:

Red

Battery charging in process.

Green

Battery charging is complete.

Note

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

You can use the phone while the battery is being charged. For charging times, see

page

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup

Phone Power, on