Cisco 7931G - Unified IP Phone VoIP Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 7931G - Unified IP Phone VoIP. Cisco 7931G - Unified IP Phone VoIP 20 pagina's. For cisco unified callmanager express 4.0
Ook voor Cisco 7931G - Unified IP Phone VoIP: Administratiehandleiding (10 pagina's), Administratiehandleiding (17 pagina's), Administratiehandleiding (20 pagina's), Installatie-instructies (4 pagina's), Handmatig (30 pagina's), Administratiehandleiding (12 pagina's), Snelle referentie (2 pagina's), Snelle referentiekaart (2 pagina's), Gebruikershandleiding (15 pagina's)

•

Activate Do Not Disturb, page 16

•

Setting and Adjusting Your Cisco Unified IP Phone, page 9

Basic: Place a Call

To place a call, use one of the following methods:

• Lift the handset and dial the number. If you cannot hear a dial tone, choose an available line by pressing the line key.

• Dial the number and then lift the handset.

• Press the line button for your extension, dial the number, and then lift the handset.

• Press any available button, dial the number, and then lift the handset.

• Press the New Call soft key, dial the number, and then lift the handset.

• Press a speed-dial button and then lift the handset.

• If you have selected a number from a directory, press the Dial soft key, and then lift the handset.

To place a call using the speakerphone, use one of the following methods:

• Press the speakerphone button and perform the steps for placing a basic call, and do not lift the handset.

• Perform the steps for placing a basic call and do not lift the handset.

To switch to handset operation, just lift the handset.

To place a call using a headset, press the heasdset button, then perform the steps for placing a basic call, and do not lift the

handset.

To switch to handset operation, just lift the handset.

To answer a call, use one of the following methods:

• Lift the handset.

• If you are using a headset, press the line button to select between incoming calls.

• To use the speakerphone, press the line button (flashing amber), the Answer soft key, or the Speaker button.

To end a call, use one of the following methods:

• Hang up the handset.

• If you are using a headset, press the EndCall soft key.

• If you are using the speakerphone, press the Speaker button or the EndCall soft key.

To redial the most recently dialed number, use one of the following methods:

• Lift the handset and press the Redial button.

• Press a line button and then press redial.

• Press the Redial button to dial using the speakerphone.