Cisco 7931G - Unified IP Phone VoIP Handmatig - Pagina 26

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 7931G - Unified IP Phone VoIP. Cisco 7931G - Unified IP Phone VoIP 30 pagina's. For cisco unified callmanager express 4.0
Ook voor Cisco 7931G - Unified IP Phone VoIP: Gebruikershandleiding (20 pagina's), Administratiehandleiding (10 pagina's), Administratiehandleiding (17 pagina's), Administratiehandleiding (20 pagina's), Installatie-instructies (4 pagina's), Administratiehandleiding (12 pagina's), Snelle referentie (2 pagina's), Snelle referentiekaart (2 pagina's), Gebruikershandleiding (15 pagina's)

Cisco Unified IP Phone Installation

See the Cisco Unified Communications Manager Administration Guide, "Cisco Unified IP Phone Services

Configuration" chapter.

Step 9

Add user information by configuring required fields:

• Name (last)

• User ID

• Password (for Cisco Unified Communications Manager web pages)

• PIN (for use with Extension Mobility and Personal Directory)

Adds user information to the global directory for Cisco Unified Communications Manager.

See the Cisco Unified Communications Manager Administration Guide, "End User Configuration" chapter,

and

Cisco Unified Communications Manager User

If your company uses a Lightweight Directory Access Protocol (LDAP) directory to store information on

users, you can install and configure Cisco Unified Communications to use your existing LDAP directory, see

Corporate and Personal Directory

Step 10 Add a user to a user group.

Assigns users a common list of roles and permissions that apply to all users in a user group. Administrators

can manage user groups, roles, and permissions to control the level of access (and, therefore, the level of

security) for system users.

See the Cisco Unified Communications Manager Administration Guide, "User Group Configuration" chapter.

Step 11 Associate a user with a phone (optional).

Provides users with control over their phone such as forwarding calls or adding speed-dial numbers or services.

Note

See the Cisco Unified Communications Manager Administration Guide, "End User Configuration" chapter.

Cisco Unified IP Phone Installation

After you add the phones to the Cisco Unified Communications Manager database, you can complete the

phone installation. You can install the phones at the desired locations, or you can give the phone users the

information they need to perform the installation. The Cisco Unified IP Phone Installation Guide, which is

available at http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html,

provides directions for connecting the phone foot stand, handset, cables, and other accessories.

Upgrade the phone to the current firmware image before installation. For information about phone upgrades,

Note

see the Readme file for your phone model located at:

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser

After the phone connects to the network, the phone startup process begins, and the phone registers with

Cisco Unified Communications Manager. To complete phone installation, configure the network settings on

the phone depending on whether you enable or disable DHCP service.

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP

and SIP)

Setup.

Some phones, such as those in conference rooms, do not have an associated

user.

Addition.

Cisco Unified IP Phone 7931G