Cisco 7940G Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 7940G. Cisco 7940G 20 pagina's. Ios telephony services ip phone
Ook voor Cisco 7940G: Gebruikershandleiding (21 pagina's), Gebruikershandleiding (25 pagina's), Gegevensblad (7 pagina's), Handmatig (35 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (15 pagina's), Snelle referentiehandleiding (2 pagina's), Telefoonhandleiding (17 pagina's), Handleiding voor beheerders (15 pagina's), Gebruikershandleiding (16 pagina's), Referentiehandleiding (24 pagina's), Administratiehandleiding (29 pagina's), Handmatig (21 pagina's), Installatiehandleiding (12 pagina's), Gebruikershandleiding (10 pagina's)

To cancel call forwarding, press the Cancel soft key.

Place a Conference Call

To place a three-party conference call, use the following method:

1. During a call, press the more soft key and then the Confrn soft key to open a new line and put the first party on hold.

2. Place a call to another number.

3. When the call connects, press the Confrn softkey again to add the new party to the existing call with the first party.

To establish a conference call between two callers to a Cisco Unified IP phone, one active and the other on hold, press the Confrn

soft key on the Cisco Unified IP phone.

To establish a conference call between two callers already present on a Cisco Unified IP phone, using separate line buttons, one

active and the other on hold, use the following method:

1. Press the Confrn soft key on the Cisco Unified IP phone.

2. Press the Line button of the call you want to add to the three-party conference.

End a Conference Call

To end the conference call, use one of the following methods:

• Hang up the handset.

• Press the EndCall soft key.

Alternate Methods to End a Conference Call

Call initiators may use one of the following methods (functionality varies according to your system configuration):

• To end the conference but remain connected to the most recent call, press the Confrn soft key. The older call is placed on

hold.

• To disconnect from the conference, hang up the handset. The other parties remain on the conference call.

Place a Call from Your Local Directory

To access the local phone directory established by the system administrator, use the following method:

1. Press the Directories button.

2. Press the Navigation Up or Down button or press 4 to select the Local Directory.

3. Press the Navigation Up or Down button to select the Last, First, or Number field search option.

4. Using the keypad, enter the last name or first name for the entry.

When entering letters, select the appropriate number key of the letter you want, and press that key a number of times that

equals the position of the target letter. For example, to enter a B, press the 2 key two times, and to enter a C, press the 2

key three times. Use the backspace (<<) soft key to make corrections while entering data.

5. Press the Search soft key to find your selection.

6. If your search results in multiple listings, use the Navigation Up or Down button to select the correct number.

7. Press the Dial soft key to dial the selected number.

Program Personal Speed-Dial Buttons

Once an administrator has defined one or more speed-dial instances for a Cisco Unified IP phone, you can reprogram numbers

that are not locked or program numbers into an instance that has an empty dial string.

To program personal speed-dial buttons, use the following method:

1. Select an available phone line by lifting the handset, by pressing the NewCall soft key, or by pressing a line button. Listen

for the dial tone.

2. Press the pound key (#).