Cisco 7940G Administratiehandleiding - Pagina 17

Blader online of download pdf Administratiehandleiding voor {categorie_naam} Cisco 7940G. Cisco 7940G 29 pagina's. Ios telephony services ip phone
Ook voor Cisco 7940G: Gebruikershandleiding (21 pagina's), Gebruikershandleiding (25 pagina's), Gegevensblad (7 pagina's), Handmatig (35 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (15 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (20 pagina's), Telefoonhandleiding (17 pagina's), Handleiding voor beheerders (15 pagina's), Gebruikershandleiding (16 pagina's), Referentiehandleiding (24 pagina's), Handmatig (21 pagina's), Installatiehandleiding (12 pagina's), Gebruikershandleiding (10 pagina's)

Pagina afdrukken

Chapter 3

Initializing Cisco Unified IP Phones

Table 3-3

Parameter

Authentication Name

Authentication Password

Display Name

Name

Proxy Address

Proxy Port

Short Name

1. Required when registration is enabled and the registrar challenges registration.

Setting End-User Call Preferences

End users can modify call preferences from their own phones by setting certain parameters. Only call

preferences whose configuration variable has been set to 0 or 1 can be modified. If the configuration

variables are set to 2 or 3, the corresponding call preferences cannot be modified with the Call

Preferences menu. See the following procedure for more information.

To set end-user call preferences, follow these steps:

Procedure

On the IP phone, select Settings > Call Preferences.

Step 1

Step 2

Highlight and set any of the following optional preferences by pressing the Yes or No softkeys:

OL-7890-01

Phone-Specific Parameters

Description

Name used by the phone for authentication if a registration is

challenged by the proxy server during initialization.

Password used by the phone for authentication if a registration is

challenged by the proxy server during initialization. If a value is not

configured for the Authentication Password parameter when

registration is enabled, the default logical password is used. The default

logical password is SIPmac-address, where mac-address is the MAC

address of the phone.

Identification as it should appear for caller identification. For example,

instead of [email protected] appearing on phones that have caller

ID, you can specify John Doe in this parameter to have John Doe

appear on the callee end instead. If a value is not specified for this

parameter, the Name value is used.

Description phone number or e-mail address used when registering.

When entering a number, enter the number without any dashes. For

example, enter 555-0100 as 5550100.

IP address of the primary SIP proxy server that will be used by the

phone. Enter this address in IP dotted-decimal notation.

Port number of the primary SIP proxy server. This is the port that the

SIP client will use. The default is 5060.

Name or number associated with the linex_name as you want it to

display on the phone LCD if the linex_name value exceeds the display

area. For example, if the linex_name value is the phone number

111-222-333-4444, you can specify 34444 for this parameter to have

34444 display on the LCD instead. Alternatively, if the value for the

linex_name parameter is the e-mail address

"[email protected]," you can specify the "username" to have

just the username appear on the LCD instead. This parameter is used

for display only. If a value is not specified for this parameter, the value

in the Name variable is displayed.

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

Configuring the SIP Parameters Manually

3-17