Cisco 7940G Administratiehandleiding - Pagina 8

Blader online of download pdf Administratiehandleiding voor {categorie_naam} Cisco 7940G. Cisco 7940G 29 pagina's. Ios telephony services ip phone
Ook voor Cisco 7940G: Gebruikershandleiding (21 pagina's), Gebruikershandleiding (25 pagina's), Gegevensblad (7 pagina's), Handmatig (35 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (15 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (20 pagina's), Telefoonhandleiding (17 pagina's), Handleiding voor beheerders (15 pagina's), Gebruikershandleiding (16 pagina's), Referentiehandleiding (24 pagina's), Handmatig (21 pagina's), Installatiehandleiding (12 pagina's), Gebruikershandleiding (10 pagina's)

Pagina afdrukken

How to Customize a Phone-Specific Configuration File

# HTTP Proxy Support

http_proxy_addr: ""; Address of HTTP Proxy server

http_proxy_port: 80; Port of HTTP Proxy Server (80-default)

# Dynamic DNS/TFTP Support

dyn_dns_addr_1: ""; restricted to dotted IP

dyn_dns_addr_2: ""; restricted to dotted IP

dyn_tftp_addr: ""; restricted to dotted IP

# Remote Party ID

remote_party_id: 0; 0-Disabled (default), 1-Enabled

How to Customize a Phone-Specific Configuration File

You can define parameters that are specific to a particular phone, such as the lines configured on a phone

and the defined users for those lines, in a phone-specific configuration file. Parameters defined in the

phone-specific configuration file override those specified in the default configuration file.

Note

•

Procedure

Step 1

Obtain the phone-specific configuration file as follows:

Do the following for each phone that you plan to install:

Step 2

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

3-8

If you configure a line to use an e-mail address, that line can be called only by using the e-mail

address. Similarly, if you configure a line to use a number, that line can be called only by using the

number.

Each line can have a different proxy configured.

Define the dial_template parameter in a phone-specific configuration file only if that phone needs

to use a different dial plan than the default.

For a complete alphabetical list of configurable parameters, see

Parameters."

Go to the Cisco.com SIP IP 7940/7960 phone software-download site at

http://www.cisco.com/cgi-bin/tablebuild.pl/sip-ip-phone7960.

Download the SIP<mac-addr>.cnf file to the root directory of your TFTP server or to a subdirectory

in which all phone-specific configuration files are stored.

Using an ASCII text editor such as vi, create and open a SIP<mac-addr>.cnf file for the phone.

Modify the following end-user call-preference parameters as needed to permit or deny end-user use

or customization:

•

anonymous_call_block

•

autocomplete

•

callerid_blocking

call_hold_ringback

•

call_waiting

•

dnd_control

•

Chapter 3

Initializing Cisco Unified IP Phones

Appendix D, "SIP IP Phone

OL-7890-01