Cisco 7941G - Unified IP Phone VoIP Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 7941G - Unified IP Phone VoIP. Cisco 7941G - Unified IP Phone VoIP 25 pagina's. Unified communications manager 9.0 (sccp and sip)
Ook voor Cisco 7941G - Unified IP Phone VoIP: Gebruikershandleiding (21 pagina's), Gegevensblad (7 pagina's), Snelle referentie (2 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (13 pagina's), Administratiehandleiding (12 pagina's), Gebruikershandleiding (13 pagina's), Telefoonhandleiding (30 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (6 pagina's), Administratiehandleiding (16 pagina's), Probleemoplossing en onderhoud (27 pagina's)

If multiple calls are on hold, use the Navigation button to select the desired call before you press Resume.

If multiple calls on multiple lines are on hold, press the line button for the line that you want to pick up. The active call on the

other line is automatically put on hold.

Because the hold feature can generate music or beeps, avoid using hold when dialed into a remote conference system.

Note

Simple three-party conferences that are created locally on your phone can safely be placed on hold without introducing

music or beeps into the conference.

Mute a Call

To mute a call, press the Mute button. The Mute button lights, indicating that the other party cannot hear you.

To deactivate the mute function:

• Press the Mute button again.

• Lift the handset if you are using mute with the speakerphone.

The Mute feature does not generate music or beeps.

Note

If you are on a call when a second call comes in, you hear a call-waiting tone or see a flashing indicator light on the handset

rest, depending on the configuration of your phone.

To answer the new call on the same line, use the following method:

1. Use the Navigation button to select the call.

2. Press Answer to answer the call. The call on the other line is automatically put on hold.

To return to the original call, use the following method:

1. Use the Navigation button to reselect the call.

2. Press Resume to reconnect to the call.

For calls on a separate line, press the Line button for the incoming call. The call on the other line is automatically put on hold.

To return to the original call, press the Line button associated with the original call.

To access voice messages:

1. Select an available Cisco Unified IP phone line lifting the handset, pressing the speakerphone button, or by pressing a line

button. Listen for the dial tone.

2. Press the Messages button, and follow the voice instructions.

When you have one or more new messages, if you have the message-waiting indicator (MWI) configured, the light on

Note

your handset is lit.

Call blocking prevents unauthorized use of phones. It is implemented by matching a pattern of specified digits during a specified

time and day of week or date. The call-blocking override feature allows individual phone users to override the call blocking that

has been defined.

To place calls when call blocking is enabled:

1. Press Login.