Samsung UN32C4000PD Gebruikershandleiding - Pagina 35
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Samsung UN32C4000PD. Samsung UN32C4000PD 46 pagina's. 4000 series led tv
Ook voor Samsung UN32C4000PD: Handleiding voor snelle installatie (2 pagina's), Gebruikershandleiding (4 pagina's), (Spaans) Gebruiksaanwijzing (46 pagina's), (Koreaans) Gebruikershandleiding (46 pagina's)
Pagina afdrukken
¦
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on the
screen.
The Anynet+ device does not play.
The connected device is not
displayed.
The TV Program cannot be
recorded.
The TV sound is not output
through the receiver.
Possible Solution
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•
Only one receiver (home theater) can be connected.
•
Check if the Anynet+ device power cord is properly connected.
•
Check the Anynet+ device's Video/Audio/HDMI cable connections.
•
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
•
Check whether the TV remote control is in TV mode.
•
Check whether the remote control is Anynet+ compatible.
•
Anynet+ doesn't work in certain situations. (Searching channels, operating Media Play (USB) or Plug & Play
(initial setup), etc.)
•
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
•
Check if the Anynet+ Function of Anynet+ device is set on.
•
Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
•
Press the
TOOLS
button to display the Anynet+ menu and select a menu you want.
•
Select View TV in the Anynet+ menu.
•
Press the SOURCE button on the TV remote control and select a non- Anynet+ device.
•
Press z, PRE-CH, and
when a tuner-embedded Anynet+ device is not connected.)
•
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
•
Use the remote control when the Anynet+ setting or switching to view mode is complete.
•
You cannot use the play function when Plug & Play (initial setup) is in progress.
•
Check whether or not the device supports Anynet+ functions.
•
Check whether or not the HDMI cable is properly connected.
•
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
•
Search Anynet+ devices again.
•
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
•
If connection is terminated because there has been a power interruption or the HDMI cable has been
disconnected, please repeat the device scan.
•
Check whether the antenna jack on the recording device is properly connected.
•
Connect the optical cable between TV and the receiver.
FAV.CH
to change the TV mode. (Note that the channel button operates only
35
English