Siemens SIMATIC S7-1200 Handmatig - Pagina 15

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC S7-1200. Siemens SIMATIC S7-1200 31 pagina's. Controlling several fans (ebm-papst) via modbus rtu
Ook voor Siemens SIMATIC S7-1200: Handmatig (30 pagina's), Gebruiksaanwijzing (36 pagina's), Veiligheidsprogrammering Manualline (48 pagina's), Handmatig (40 pagina's), Handmatig (17 pagina's), Handmatig (49 pagina's), Handmatig (20 pagina's)

Pagina afdrukken
Siemens SIMATIC S7-1200 Handmatig
4 Configuration and Settings
No.
Action
4.
Open the device configuration of the
CPU and configure the PROFINET
interface.
Open the "Properties" of the
1.
CPU.
Select "Ethernet addresses".
2.
3.
Add a new subnet.
4.
Enter the desired IP address and
subnet mask.
5.
You can also specify the
PROFINET device name in this
mask.
Configuring the SINAMICS G120 drive
Table 4-2: Adding the drive
No.
Action
1.
Select the desired SINAMICS drive.
In the "devices and networks"
1.
editor, go to the "Network view".
2.
Now drag the desired
PROFINET-capable SINAMICS
drive into the graphic area.
(The SINAMICS drive is configured in
the TIA Portal using Startdrive)
2.
Connect the Ethernet connections of
the SIMATIC controller and the
SINAMICS drive with each other.
3.
Assign a power module to the drive
added in the network view. (This step
is not necessary when using a
G120C drive):
Open the "Device view".
1.
2.
Select a power module from the
hardware catalog and add it to
the drive.
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727,
V1.0,
06/2017
Remark
3
4
5
Remark
15