Safety Guidelines
Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected equipment.
These warning notices are accompanied by a clarification of the level of caution to be observed.
Qualified Personnel
This device/system may only be set up and operated in conjunction with this manual. Qualified personnel are only authorized to install and
operate this equipment in accordance with established safety practices and standards.
Unit Repair and Excluded Liability:
•
The user is responsible for all changes and repairs made to the device by the user or the user's agent.
•
All new components are to be provided by Siemens.
•
Restrict repair to faulty components only.
•
Do not reuse faulty components.
Warning:
Cardboard shipping package provides limited humidity and moisture protection. This product can only function properly and safely if
it is correctly transported, stored, installed, set up, operated, and maintained.
This product is intended for use in industrial areas. Operation of this equipment in a residential area may cause interference to several
frequency based communications.
Note:
Always use product in accordance with specifications.
Copyright Siemens AG 2015. All Rights Reserved
This document is available in bound version and in
electronic version. We encourage users to purchase
authorized bound manuals, or to view electronic versions as
designed and authored by Siemens. Siemens will not be
responsible for the contents of partial or whole
reproductions of either bound or electronic versions.
European Authorized Representative
Siemens AG
Industry Sector
76181 Karlsruhe
Deutschland
•
For a selection of Siemens level measurement manuals, go to:
www. siemens.com/processautomation. Select Products & Systems, then under Process Instrumentation, select
Manual archives can be found on the Support page by product family.
•
For a selection of Siemens weighing manuals, go to:
www. siemens.com/processautomation. Under Products & Systems, select
Manual archives can be found on the Support page by product family.
© Siemens AG 2015
Disclaimer of Liability
While we have verified the contents of this
manual for agreement with the instrumentation
described, variations remain possible. Thus we
cannot guarantee full agreement. The contents of
this manual are regularly reviewed and
corrections are included in subsequent editions.
We welcome all suggestions for improvement.
Technical data subject to change.
Weighing and Batching Systems.
Level Measurement.
Pagina afdrukken