Siemens dishwasher Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens dishwasher. Siemens dishwasher 34 pagina's. Dishwasher
Ook voor Siemens dishwasher: Gebruiksaanwijzing (29 pagina's), Gebruiksaanwijzing (30 pagina's), Gebruiksaanwijzing (30 pagina's), Gebruiksaanwijzing (30 pagina's), Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (26 pagina's), Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (26 pagina's), Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (32 pagina's), Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (34 pagina's), Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (34 pagina's), Gebruiksaanwijzing (26 pagina's), Gebruiksaanwijzing (40 pagina's), Gebruiksaanwijzing (31 pagina's), Gebruiksaanwijzing (40 pagina's), Gebruiksaanwijzing (24 pagina's), Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (28 pagina's)

Pagina afdrukken
Siemens dishwasher Gebruiksaanwijzing
Setting up the water
softener
In order to provide satisfactory rinsing
results, the dishwasher requires soft water,
i.e., containing little or no lime, otherwise
water stains will be left behind on the
dishes and interior containers.
If the tap water exceeds a certain level of
hardness, it must be softened, i.e.,
decalcified, so that it can be used in the
dishwasher.
This is achieved by adding a special salt
to the water softener inside the
dishwasher.
The water softener, that is the required
amount of salt, is set up according to how
hard the tap water is.
The limescale absorption capacity of the
water softening system is limited. When
the water softening system is exhausted, it
must be regenerated, i.e. refreshed with
salt.
The optical limescale sensor determines
the degree of hardness and controls the
water softening system when "Hardness
auto" is selected.
The "Hardness auto" factory setting does
not require any adjustments when the
appliance is switched on for the first time
or if the water hardness varies.
If you would nevertheless like to set
the water softening system manually,
proceed as follows:
Find out the degree of hardness of your
tap water. Your water supply company
or customer service will assist you.
Switch on the appliance with the main
switch
. The main menu is
1
displayed (if switching on the appliance
for the first time, only when a language
has been selected and dispensers
have been filled with salt (if required)
and rinse aid).
Auto Wash
Options
Press the
"Options" button until the
"Hardness auto" setting is displayed.
Using the buttons
set value between 0 and 7 which
corresponds with the degree of
hardness of your tap water in the
following table. "Hardness auto"
has been preset at the factory.
Press the
button. The set value has
been saved and you are returned to the
Start menu.
If the set value is "0", the water softening
system is switched off. A low salt level will
not be displayed.
en
Start
or
, select the
9