Epson BrightLink 450Wi - Interactive Projector Installatie Handboek

Blader online of download pdf Installatie Handboek voor {categorie_naam} Epson BrightLink 450Wi - Interactive Projector. Epson BrightLink 450Wi - Interactive Projector 10 pagina's. Remote control information
Ook voor Epson BrightLink 450Wi - Interactive Projector: Start hier Handleiding (6 pagina's), Brochure & specificaties (18 pagina's), Installatie (5 pagina's), Montagesjabloon (1 pagina's), Maattekening (2 pagina's), Montagesjabloon (5 pagina's), Gebruikershandleiding (25 pagina's), Snelstarthandleiding (2 pagina's), Gebruik (4 pagina's), Brochure & specificaties (18 pagina's)

Epson BrightLink 450Wi / 455Wi

note

If a button is stuck down for

longer than 30 seconds, the

remote control stops

operating to conserve battery

power. When you release the

button, normal operation

resumes.

Using the remote control

under bright uorescent

lamps or in direct sunlight

may a ect projector

response.

Using the Remote Control

Make sure batteries are installed . Follow

these tips for using the remote control:

Point the remote control at the projector or at the screen.

Stand within 19.7 feet (6 meters) of the projector.

Aim the remote control within 30° to the side of, or 15° above or

below, the remote control receivers on the projector.

Controlling the Picture and Sound

You can use the remote control to temporarily turn o the picture and

sound, freeze the action, zoom in on the picture, and adjust the

volume.

Turning Off the Picture and Sound

Press the

button on the remote control to turn o the

A/V Mute

image and sound, and darken your screen. This is useful if you want to

temporarily re-direct your audience's attention without the distraction

of a bright screen.

A/V Mute button

To turn the image and sound back on, press the button again.

You can create an image, such as a company logo or picture, to display

on the screen whenever you press the

INSTALLATION HANDBOOK

Remote Control Information

button.

A/V Mute