Siemens SKS62E12EU Gebruiksaanwijzing - Pagina 17

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SKS62E12EU. Siemens SKS62E12EU 25 pagina's.

Pagina afdrukken

Troubleshooting

The majority of faults which could occur in

daily operation can be rectified by the

user. This ensures that the appliance is

quickly available for use again. The

following overview will help you locating

the causes and gives helpful advise to

eliminate them.

Note

If the appliance stops during dishwashing

or does not start for no obvious reason,

first run the Abort programme function

(Reset).

(See chapter entitled "Dishwashing")

Warning

If on the digital display @ an error code

( :

to :

), always disconnect the

appliance from the power supply and then

turn off the tap.

You can rectify certain faults yourself (see

following fault description), for all other

faults please contact customer service and

state the indicated fault :XX.

Warning

Don't forget: Repairs may be carried out

by technicians only. If a component has to

be replaced, ensure that only original

spare parts are used. Improper repairs or

use of non-original spare parts may cause

considerable damage and put the user at

considerable risk.

Waste water pump

Large food remnants in the rinsing water

not retained by the filters may block the

waste water pump. The rinsing water is

then not pumped out and covers the filter.

In this case:

– First disconnect the appliance from the

power supply.

– Remove the filters 1*.

– Scoop out water, use a sponge if

required.

– Loosen screws on the pump cover

(Torx T 20) and pull off.

– Check inner compartment and remove

any foreign objects.

– Place pump cover in the original

position, press down and screw tight.

– Install filters.