Siemens SN Series Gebruiksaanwijzing - Pagina 29

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SN Series. Siemens SN Series 44 pagina's. Dishwasher
Ook voor Siemens SN Series: Bedieningsinstructies (38 pagina's), Gebruiksaanwijzing (38 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (46 pagina's), Gebruiksaanwijzing (44 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (48 pagina's), Gebruiksaanwijzing (40 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (44 pagina's), Gebruiksaanwijzing (40 pagina's)

Pagina afdrukken

Fault, what to do?

F a u l t ,

w h a t

Experience has shown that you can

rectify most faults which occur in daily

operation yourself. This ensures that

the machine is quickly available to you

again. In the following overview you can

find possible causes of malfunctions

and helpful information for rectifying

them.

Note

If the appliance stops during

dishwashing or does not start for no

obvious reason, first run the Abort

programme function (Reset).

(See chapter entitled "Operating

the appliance")

Warning – Don't forget: Repairs may

be carried out by technicians only. If a

component has to be replaced, ensure

that only original spare parts are used.

Improper repairs or use of non-original

spare parts may cause considerable

damage and put the user at

considerable risk.

Waste water pump

Large food remnants or foreign objects

which were not captured by the filters

may block the waste water pump. The

rinsing water will then be above

the filter.

Warning – Risk of cuts!

When cleaning the waste water pump,

ensure that you do not injure yourself

on pieces of broken glass or pointed

implements.

t o

d o ?

Fault, what to do?

In this case:

1. First always disconnect

the appliance from the power supply.

2. Take out top basket 1* and bottom

basket 9*.

3. Remove the filters 1j.

4. Scoop out water, use a sponge if

required.

5. Prise out the white pump cover

(as illustrated) using a spoon. Grip

the cover on the crosspiece and lift

diagonally inwards. Remove cover

completely.

6. Check impeller wheel and remove

any foreign objects.

7. Place cover in the original position

and press down until it engages

(click).

8. Install filters.

9. Re-insert baskets.