Epson BrightLink 455Wi Bedieningshandleiding - Pagina 25

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Epson BrightLink 455Wi. Epson BrightLink 455Wi 47 pagina's. Remote control information
Ook voor Epson BrightLink 455Wi: Brochure & specificaties (20 pagina's), Start hier Handleiding (6 pagina's), Gebruikershandleiding (8 pagina's), Gebruikershandleiding (7 pagina's), Product ondersteunings bulletin (5 pagina's), Montagesjabloon (5 pagina's), Gebruikershandleiding (25 pagina's), Brochure & specificaties (6 pagina's), Installatie Handboek (10 pagina's)

Pagina afdrukken

Epson BrightLink 455Wi Bedieningshandleiding

Monitoring window layout

Lamp failure at power on

(Lamp 1)

High internal temperature

error

Air filter air flow sensor error

Fan error

Supply System Error

(Ballast)

Supply System Error (Ballast

Cinema filter error

Cooling system error

(Peltier element)

Other error

*1 When Temperature level display group view is set to On at Environment

setup in the Tool menu, an icon indicating the internal temperature of the

projector will be displayed on top of the projector icon. The default setting

is Off.

*2 Check the following items.

- Check that the projector's power is turned on.

- Check that the LAN cable is connected.

- Check that Standby Mode is set to Communication On (or Network On)

or Network Monitoring is set to On in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

*4 Using Environment setup in the Tool menu, you can set a duration of time

after which the Replace Lamp notification will appear. (The notification will

appear earlier if the lamp needs to be replaced before the selected time.)

• The projector information that is generated when a problem is detected is

stored until EasyMP Monitor is closed. EasyMP Monitor displays will not

be updated automatically even if the projector status returns to normal.

Click "Refresh" in the main window to update the status.

Lamp failure at power on

(Lamp 2)

Low air flow error

Internal Error

Sensor error

Supply System Error (Ballast

Auto Iris Error

Shutter error

Cooling system error

(pump)

• Detectable error information differs with the projector you are using.

Selecting display items

You can select only the required items to be displayed in Detail list view.

Procedure

Select "Option" from the View menu.

The Option window will be displayed.

Select the check box of the item you want to display.

Click "OK".