Siemens SX Series Gebruiksaanwijzing - Pagina 30

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SX Series. Siemens SX Series 46 pagina's. Dishwasher
Ook voor Siemens SX Series: Bedieningsinstructies (38 pagina's), Gebruiksaanwijzing (38 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (44 pagina's), Gebruiksaanwijzing (44 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (48 pagina's), Gebruiksaanwijzing (40 pagina's), Gebruiksaanwijzing (42 pagina's), Gebruiksaanwijzing (44 pagina's), Gebruiksaanwijzing (40 pagina's)

Spray arms

Limescale and contaminants in the

rinsing water may block nozzles and

bearings on the spray arms 1: and

1J.

1. Check outlet nozzles on the spray

arms for blockages.

2. Unscrew the upper spray arm 1:.

3. Remove the lower spray arm 1J

upwards.

4. Clean spray arms under running

water.

5. Re-engage or screw on spray arms.

Fault, what to do?

F a u l t, w h a t to d o ?

Experience has shown that you can

rectify most faults which occur in daily

operation yourself. This ensures that

the machine is quickly available to you

again. In the following overview you can

find possible causes of malfunctions

and helpful information for rectifying

them.

Note

If the appliance stops during

dishwashing or does not start for no

obvious reason, first run the Abort

programme function (Reset).

(See chapter entitled "Operating

the appliance")

Warning – Don't forget: Repairs may

be carried out by technicians only. If a

component has to be replaced, ensure

that only original spare parts are used.

Improper repairs or use of non-original

spare parts may cause considerable

damage and put the user at

considerable risk.