Cisco 7942G - Unified IP Phone VoIP Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 7942G - Unified IP Phone VoIP. Cisco 7942G - Unified IP Phone VoIP 16 pagina's. Unified communications manager 9.0 (sccp and sip)
Ook voor Cisco 7942G - Unified IP Phone VoIP: Gebruikershandleiding (23 pagina's), Gegevensblad (5 pagina's), Installatiehandleiding (12 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (4 pagina's), Administratiehandleiding (12 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (12 pagina's), Handmatig (11 pagina's), Gebruikershandleiding (6 pagina's), Administratiehandleiding (16 pagina's), Probleemoplossing en onderhoud (27 pagina's)

CLOUD VOICE S Service – Cisco IP Phone 7942G

Call Management Features

4.1

When you put a call on hold, the call remains active even though you and the other

party cannot hear each other. You can answer or place another call while a call is

being on hold.

1. During a call, press the Hold soft key.

2. To return to the call, press the Resume soft key.

4.2

If you are enabled with call waiting for your phone, you will hear a call waiting tone

and the caller ID information will be shown on the phone‟s LCD screen if a new call

comes in when you are on the phone.

1. To answer the new call, press the Answer soft key. When you do so, the

original call will be put on hold.

To return to the original call, press the Hold button.

If the second call is still active, the call will be put on hold when you return to the

original call.

You can continue to use the Hold button to switch between the calls.

4.3

1. To transfer a call to another phone, press the Transfer

soft key.

2. Dial the number to which you are transferring the call.

3. When you hear the ringing tone, press Transfer again

or, when the party answers, announce the call and

press Transfer.

4. Hang up to end your participation in the call.

4.4

1. Lift up the Handset and press the Redial soft key.

Note: You can also press the Redial soft key to place the call via Speakerphone

Version 5.0