Cisco 7942G - Unified IP Phone VoIP Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 7942G - Unified IP Phone VoIP. Cisco 7942G - Unified IP Phone VoIP 11 pagina's. Unified communications manager 9.0 (sccp and sip)
Ook voor Cisco 7942G - Unified IP Phone VoIP: Gebruikershandleiding (23 pagina's), Gegevensblad (5 pagina's), Installatiehandleiding (12 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (4 pagina's), Administratiehandleiding (12 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (12 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (6 pagina's), Administratiehandleiding (16 pagina's), Probleemoplossing en onderhoud (27 pagina's)

Requirements

To start and successfully complete registration of your Cisco phone you need to know which

phone model you will setup.

On the front of each Cisco phone there are exact model information that you should check.

Although different phone models can have exactly the same requirements and installation

procedure, phone models can also have significantly different requirements and installation

procedure, so that ignorance of your own model may result in the inability to successfully set up

your phone.

Make sure that device is loaded with firmware (Application Load ID) 7.X or 8.X.

Press the Settings button.

Scroll to Status and press the select button.

Scroll to Firmware Versions and press the select button.

The firmware is listed under Application Load ID.

Fully configured and operational DHCP server.

In order to find out the PBXware version, please login to PBXware and navigate to Settings:

About. On the top of About page is a code similar to this one "PBXware Edition: Business,

Release: 3.1 (041373f), Running: 1.4.24-gc-75ee203", where "Release" denotes the exact version

of your PBXware.