Siemens EH611BE15E Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Siemens EH611BE15E. Siemens EH611BE15E 28 pagina's. Induction hob with integrated ventilation system
Pagina afdrukken
14
Basic settings
You can configure the appliance to meet your needs.
14.1 Basic settings table
Display
Function
Childproof lock
1
Manual.
Automatic.
Function deactivated.
Audible signals
Confirmation and fault signals are deac-
tivated.
Only the fault signal activated.
Only the confirmation signal is activated.
All signal tones are activated.
Automatically programming the cooking
time
Switched off.
-
Time until automatic switch-off.
Duration of the timer end signal tone
10 seconds.
30 seconds.
1 minute.
Power management function. Limit the
total power of the hob
. The available settings depend on the
maximum power of the hob
Deactivated. Maximum power of the
12
hob.
1000 W minimum power.
. 1500 W.
...
3000 W. Recommended for 13 A.
. 3500 W. Recommended for 16 A.
4000 W.
. 4500 W. Recommended for 20 A.
...
or . Maximum power of the hob.
Time for selecting the cooking zone
Unlimited: The cooking zone that was
last set remains selected.
Limited: The cooking zone only remains
selected for a few seconds.
Checking cookware, result of the cook-
ing process
Not suitable.
Not optimal.
Suitable.
Set circulating-air mode or air extraction
mode
Configure circulating-air mode.
Configure air extraction mode.
1
Factory setting
2
The hob's maximum power is shown on the rating
plate.
1
1
1
2
1
1
Display
Function
Setting automatic start
Deactivated.
Switched on.
Set the run-on
Deactivated.
Activated
If your hob is working in air extraction
mode, the ventilation system is switched
on at the power level for approx. six
minutes.
If your hob is working in circulating-air
mode, the ventilation system is switched
on at the power level for approx. 30
minutes.
The run-on function automatically switches
off after this time.
Restoring factory settings
Individual settings.
Factory settings.
1
Factory setting
2
The hob's maximum power is shown on the rating
plate.
14.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, touch and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
or
to view the individual displays.
Touch
to access the basic settings.
3.
and , along with , light up alternately as a pre-
a
setting.
Touch
repeatedly until the required function is
4.
displayed.
Basic settings en
1
1
:
1
.
Display
.
.
for
15