Cisco 7945G - Unified IP Phone VoIP Beheerdershandleiding - Pagina 5

Blader online of download pdf Beheerdershandleiding voor {categorie_naam} Cisco 7945G - Unified IP Phone VoIP. Cisco 7945G - Unified IP Phone VoIP 6 pagina's. Unified ip phone
Ook voor Cisco 7945G - Unified IP Phone VoIP: Voorbereiden op installatie (17 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (23 pagina's), Installatiehandleiding (19 pagina's), Beknopte handleiding (12 pagina's), Beknopte handleiding (15 pagina's), Handmatig (9 pagina's), Snelle referentiehandleiding (3 pagina's), Probleemoplossing en onderhoud (25 pagina's), Gebruikershandleiding (42 pagina's)

How to Restore Factory Default

Quick Steps

1. Unplug the power cable from the phone and then plug it back in. The phone will begin its

power-up cycle.

2. While the phone is powering up, and before the Speaker button flashes on and off, press and

hold #. Continue to hold # until each line button flashes on and off in sequence in amber.

3. Release # and press 123456789*0#. After you press these keys, the line buttons on the

phone flash red, and the phone goes through the factory default process. Do not power down

the phone until this process is complete.