Cisco 7945G - Unified IP Phone VoIP Probleemoplossing en onderhoud - Pagina 20

Blader online of download pdf Probleemoplossing en onderhoud voor {categorie_naam} Cisco 7945G - Unified IP Phone VoIP. Cisco 7945G - Unified IP Phone VoIP 25 pagina's. Unified ip phone
Ook voor Cisco 7945G - Unified IP Phone VoIP: Voorbereiden op installatie (17 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (23 pagina's), Installatiehandleiding (19 pagina's), Beknopte handleiding (12 pagina's), Beknopte handleiding (15 pagina's), Beheerdershandleiding (6 pagina's), Handmatig (9 pagina's), Snelle referentiehandleiding (3 pagina's), Gebruikershandleiding (42 pagina's)

Pagina afdrukken
Cisco 7945G - Unified IP Phone VoIP Probleemoplossing en onderhoud

Cisco Unified IP Phone Reset or Restore

Cisco Unified IP Phone Reset or Restore
Two methods exist for resetting or restoring the Cisco Unified IP Phone:

Basic Reset

Performing a basic reset of a Cisco Unified IP Phone provides a way to recover if the phone experiences an
error and provides a way to reset or restore various configuration and security settings.
The following table describes the ways to perform a basic reset. You can reset a phone with any of these
operations any time after the phone has started up. Choose the operation that is appropriate for your situation.
Table 4: Basic Reset Methods
Operation
Restart phone
Erase softkey

Factory Reset

When you perform a factory reset of the Cisco Unified IP Phone, the following information is erased or reset
to its default value:
• CTL file: Erased
• LSC: Erased
• User configuration settings: Reset to default values
• Network configuration settings: Reset to default values
Troubleshooting and Maintenance
20
Performing
From the Main screen, press
Settings to display the Settings
menu, then press **#**.
This factory reset
Note
sequence also works
from any other screen
that does not accept user
input.
From the Settings menu, unlock
phone options (see
Unlock and
Lock
Options). Then press Erase.
From the Network Configuration
menu, unlock phone options (see
Unlock and Lock
Options). Then
press Erase.
From the Security Configuration
menu, unlock phone options (see
Unlock and Lock
Options). Then
press the Erase softkey.
Troubleshooting and Maintenance
Explanation
Resets any user and network
configuration changes that you have
made but that the phone has not
written to the flash memory to
previously saved settings, then
restarts the phone.
Resets user and network
configuration settings to their
default values, deletes the CTL file
from the phone, and restarts the
phone.
Resets network configuration
settings to their default values and
resets the phone. (This method
causes DHCP reconfigure the IP
address of the phone.)
Deletes the CTL file from the
phone and restarts the phone.