Cisco 7962G - Unified IP Phone VoIP Probleemoplossing en onderhoud - Pagina 19

Blader online of download pdf Probleemoplossing en onderhoud voor {categorie_naam} Cisco 7962G - Unified IP Phone VoIP. Cisco 7962G - Unified IP Phone VoIP 27 pagina's. Unified communications manager 9.0 (sccp and sip)
Ook voor Cisco 7962G - Unified IP Phone VoIP: Gebruikershandleiding (23 pagina's), Gegevensblad (5 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (4 pagina's), Specificaties (5 pagina's), Administratiehandleiding (12 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (12 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (6 pagina's), Administratiehandleiding (16 pagina's)

Troubleshooting and Maintenance

Summary

Peer Firmware Sharing fails.

Cisco VT Advantage/Unified Video Advantage

(CVTA)

Phone call cannot be established

General Troubleshooting Information

Explanation

If the Peer Firmware Sharing fails, the phone will

default to using the TFTP server to download

firmware. Access the log messages stored on the

remote logging machine to help debug the Peer

Firmware Sharing feature.

Note

These log messages are different from the

log messages sent to the phone log.

If you are having problems getting CVTA to work,

make sure that the PC Port is enabled, and that CDP

is enabled on the PC port.

See

Network Configuration Menu

information.

The phone does not have a DHCP IP address, is

unable to register to Cisco Unified Communications

Manager, and shows a Configuring IP or Registering

message.

Verify the following:

1. The Ethernet cable is attached.

2. The Cisco CallManager service is running on the

Cisco Unified Communications Manager server.

3. Both phones are registered to the same Cisco

Unified Communications Manager.

4. Audio server debug and capture logs are enabled

for both phones. If needed, enable Java debug.

Troubleshooting and Maintenance

for more