Cisco 7965G - Unified IP Phone VoIP Voorbereiden op installatie - Pagina 13

Blader online of download pdf Voorbereiden op installatie voor {categorie_naam} Cisco 7965G - Unified IP Phone VoIP. Cisco 7965G - Unified IP Phone VoIP 17 pagina's. Unified ip phone
Ook voor Cisco 7965G - Unified IP Phone VoIP: Gebruikershandleiding (4 pagina's), Gebruikershandleiding (27 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (23 pagina's), Installatiehandleiding (19 pagina's), Beknopte handleiding (15 pagina's), Handmatig (9 pagina's), Probleemoplossing en onderhoud (25 pagina's), Snelle referentiehandleiding (7 pagina's), Gebruikershandleiding (42 pagina's)

Pagina afdrukken

Cisco 7965G - Unified IP Phone VoIP Voorbereiden op installatie

Chapter 2

Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones with Cisco Unified Communications Manager Administration

You can add phones individually to the Cisco Unified Communications Manager database using

Cisco Unified Communications Manager Administration. To do so, you first need to obtain the MAC

address for each phone.

For information about determining a MAC address, see

Unified IP Phone, page

After you have collected MAC addresses, in Cisco Unified Communications Manager Administration,

choose Device > Phone and click Add New to begin.

For complete instructions and conceptual information about Cisco Unified Communications Manager,

refer to Cisco Unified Communications Manager Administration Guide and to Cisco Unified

Communications Manager System Guide.

Adding Phones with BAT

Cisco Unified Communications Bulk Administration Tool (BAT), which is a menu option in Cisco

Unified Communications Manager Administration, enables you to perform batch operations, which

includes registration, on multiple phones.

To add phones using BAT only (not in conjunction with TAPS), you first need to obtain the appropriate

MAC address for each phone.

For information about determining a MAC address, see

Unified IP Phone, page

To add a phone to the Cisco Unified Communications Manager, follow these steps:

Procedure

From Cisco Unified Communications Manager, choose Bulk Administration > Phones > Phone

Step 1

Template.

Click Add New.

Step 2

Choose a Phone Type and click Next.

Step 3

Enter the details of phone specific parameters like Device Pool, Phone Button Template, Device Security

Step 4

Profile and so on.

Click Save.

Step 5

OL-23092-01

Adding Phones with Auto-Registration, page 2-11

Adding Phones with Cisco Unified Communications Manager Administration, page 2-13

Adding Phones with BAT, page 2-13

2-15.

Adding Phones with Auto-Registration, page 2-11

Adding Phones with Auto-Registration and TAPS, page 2-12

Adding Phones with BAT, page 2-13

2-15.

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5

Adding Phones to the Cisco Unified Communications Manager Database

Determining the MAC Address of a Cisco

2-13