Cisco 7965G - Unified IP Phone VoIP Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 7965G - Unified IP Phone VoIP. Cisco 7965G - Unified IP Phone VoIP 23 pagina's. Unified ip phone
Ook voor Cisco 7965G - Unified IP Phone VoIP: Voorbereiden op installatie (17 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (27 pagina's), Gebruikershandleiding (14 pagina's), Installatiehandleiding (19 pagina's), Beknopte handleiding (15 pagina's), Handmatig (9 pagina's), Probleemoplossing en onderhoud (25 pagina's), Snelle referentiehandleiding (7 pagina's), Gebruikershandleiding (42 pagina's)

To use the intercom feature:

1. Press the Speaker button and get the dial tone.

2. Press the speed dial key or dial the directory number to start the intercom call.

The called Cisco Unified IP phone automatically answers the call in speakerphone mode with mute activated or

Note

deactivated depending on the configuration. The phone beeps to alert the recipient to the incoming call.

To respond to an intercom call:

• If Mute key is lighted, Press the Mute button, or lift the handset.

• If Mute key is not lighted, reply to caller handsfree.

Activate Do Not Disturb (SCCP)

For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive normal

call-forward-busy and no-answer treatment.

To activate the Do-Not-Disturb feature:

1. Press the more soft key to locate the DnD soft key.

2. Press the DnD soft key. A text message displays to indicate that the phone is in Do-Not-Disturb mode.

Note

Pressing the DnD soft key immediately forwards the call to the call-forward destination set on the phone. If the

call-forward destination is not set, pressing the DnD soft key disables the ringer.

To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2.

Activate Do Not Disturb (SIP)

For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive normal

call-forward-busy and no-answer treatment.

To activate the Do-Not-Disturb feature:

1. Press the more soft key to locate the DnD soft key.

2. Press the DnD soft key. A text message displays to indicate that the phone is in Do-Not-Disturb mode.

To deactivate the Do-Not-Disturb feature, repeat Steps 1 and 2 in idle state.

Place a Call Using Your Cisco Extension Mobility Profile

Cisco Extension Mobility (EM) allows the user to temporarily configure a Cisco Unified IP phone to function as user's own

phone. After the user is logged-in to Cisco EM, the phone adopts the user's profile, including the line buttons, features, and

established services.

To log-in to Cisco Extension Mobility:

1. Press Services button and select Extension Mobility.

2. Enter your user ID and password.

3. Press Submit. The phone will temporarily configure user profile and settings.

Note

Your administrator must configure Extension Mobility for you.

Place a Call from Your Personal Speed-Dial

To place a call from your Personal Speed-Dial using My Phone Apps:

1. Log-in to Extension Mobility.