Epson EasyMP EMP-1715 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson EasyMP EMP-1715. Epson EasyMP EMP-1715 25 pagina's. Esc/vp21 command user's guide for business projectors
Ook voor Epson EasyMP EMP-1715: Specificaties (1 pagina's), Gebruikershandleiding (25 pagina's), Handleiding Snelkoppeling (44 pagina's), Specificaties (4 pagina's), Snelstarthandleiding (16 pagina's), Gebruikershandleiding (28 pagina's), Gebruikershandleiding (28 pagina's)

ESC/VP21 Command User's Guide for Business Projectors

5. Command transmission timing

5.1. Standby state

1). For all mode with the standby configuration of "network on"

The first command can be sent anytime and the subsequent commands should be sent after receiving a colon from the

projector.

2). Other than 1)

PWR ON can be sent any time.

5.2. Power on state

A command should be sent after receiving the colon of the previous command from the projector. The following is an

exception. When the PWR OFF command is sent to 7800/7850/8300/9300 with the standby configuration of "network off",

the subsequent command should be sent 10 seconds after the colon is received.

In case that you can not wait for the colon and send a command after receiving it, instead send a command after the

execution time listed in the following table.