Cisco 8811 Handmatig - Pagina 28

Blader online of download pdf Handmatig voor {categorie_naam} Cisco 8811. Cisco 8811 48 pagina's. Calltower vpn enabled phone
Ook voor Cisco 8811: Gebruikershandleiding (16 pagina's), Kenmerken (16 pagina's), Snelstarthandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (24 pagina's), Gebruikershandleiding (28 pagina's), Masterhandleiding voor firmwaremigratie (31 pagina's), Gebruikershandleiding (30 pagina's), Handmatig (44 pagina's), Snelstarthandleiding (2 pagina's), Herconfiguratiehandleiding (2 pagina's), Problemen oplossen (4 pagina's), Snelle referentiehandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (22 pagina's), Aan de slag (2 pagina's), Snelstarthandleiding (2 pagina's), Snel aan de slag (2 pagina's)

Pagina afdrukken

Configure the Busy Lamp Field on a Key Expansion Module

Before you begin

Access the phone administration web page. See

Procedure

Step 1

Select Voice > Att Console.

Step 2

Set the Attendant Console LCD Contrast to a value between 1 and 15.

You can also configure the parameter in the configuration file (cfg.xml) by entering a string in the following

format:

<Attendant_Console_LCD_Brightness ua="na">12</Attendant_Console_LCD_Brightness>

The higher the number, the greater the brightness on the key expansion module screen. The default value is

12. If no value is entered, the LCD brightness level is equal to 1, the dimmest value.

Step 3

Click Submit All Changes.

Configure the Busy Lamp Field on a Key Expansion Module

You can configure the busy lamp field on a key expansion module line so that the user can monitor a coworker's

availability to receive a call.

Before you begin

Access the phone administration web page. See

Procedure

Step 1

Select Voice > Att Console.

Step 2

Select a key expansion module line key.

Step 3

Enter a string in this format:

fnc=blf;sub=xxxx@$PROXY;usr=8888@$PROXY.

Where:

• fnc= blf means function=busy lamp field

• sub= the URI to which the SUBSCRIBE message is sent. This name must be identical to the name defined

• usr= the BroadSoft user being monitored by BLF with 8888 as the phone being monitored. Replace 8888

Step 4

(Optional) To enable the busy lamp field to work with both speed dial and call pickup enter a string in the

following format:

fnc=blf+sd+cp;sub=xxxx@$PROXY;usr=yyyy@$PROXY

Cisco IP Phone Accessories

in the List URI: sip: parameter. xxxx is the name that is defined in List URI: sip: parameter. Replace

xxxx with the exact defined name. $PROXY is the server. Replace $PROXY with the server address or

name.

with the exact number of the monitored phone. $PROXY is the server. Replace $PROXY with the server

address or name.

Access the Phone Web

Interface.

Access the Phone Web

Interface.

Cisco IP Phone Accessories