Cisco 8841 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 8841. Cisco 8841 24 pagina's. Mpp phones
Ook voor Cisco 8841: Release-opmerkingen (24 pagina's), Gebruikershandleiding (16 pagina's), Snelle referentiehandleiding (7 pagina's), Kenmerken (16 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Beknopte handleiding (2 pagina's), Snelle referentiehandleiding (6 pagina's), Gebruikershandleiding (28 pagina's), Masterhandleiding voor firmwaremigratie (31 pagina's), Gebruikershandleiding (30 pagina's), Gebruikershandleiding (29 pagina's), Handmatig (44 pagina's), Snelstarthandleiding (2 pagina's), Korte handleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Herconfiguratiehandleiding (2 pagina's), Snelstarthandleiding (6 pagina's), Handmatig (22 pagina's), Aan de slag (2 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (48 pagina's), Gebruikershandleiding (40 pagina's), Snel aan de slag (2 pagina's)

Connect to the Network

Your phone needs to be connected to the telephone network.

• Wired connection—The phone is plugged into the network using an Ethernet cable.

• Wireless connection—The phone connects to a Wireless Access Point using Wi-Fi.

• Virtual Private Network (VPN)—After the phone is connected to the network, it is set up to automatically

• Mobile and Remote Access through Expressway—After the phone is connected to the network, it is set

Set Up Wi-Fi Client

The Cisco IP Phone 8861 and 8865 can access a Wi-Fi network, but a power adaptor is required to power the

phone. The Cisco IP Phone 8865NR cannot be used with a Wi-Fi network.

Before You Begin

Your administrator needs to configure settings on the call control system to enable Wi-Fi access.

Procedure

Step 1

If the phone is plugged into the Ethernet, unplug the Ethernet cable.

Step 2

Press Applications

Step 3

Navigate to Admin settings > Network setup > Wi-Fi client setup > Wi-Fi sign in access.

Step 4

Navigate to Wireless and press On.

Step 5

Navigate to Wi-Fi sign in access and press On.

Step 6

Press Apply to save the changes, or press Revert to cancel the changes.

Connect to a Pre-Configured Wi-Fi Network

You can connect to a Wi-Fi network with your Cisco IP Phone 8861 and 8865. But the Cisco IP Phone 8865NR

does not support Wi-Fi.

Depending upon how your phone is configured, you could be required to sign in when you join a Wi-Fi

network or when your phone powers up.

You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password.

Cisco IP Phone 8800 Series User Guide

connect into a protected network.

up to automatically connect to the Expressway server.

Your Phone