Cisco 8841 Masterhandleiding voor firmwaremigratie - Pagina 14

Blader online of download pdf Masterhandleiding voor firmwaremigratie voor {categorie_naam} Cisco 8841. Cisco 8841 31 pagina's. Mpp phones
Ook voor Cisco 8841: Release-opmerkingen (24 pagina's), Gebruikershandleiding (16 pagina's), Snelle referentiehandleiding (7 pagina's), Kenmerken (16 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Beknopte handleiding (2 pagina's), Snelle referentiehandleiding (6 pagina's), Gebruikershandleiding (24 pagina's), Gebruikershandleiding (28 pagina's), Gebruikershandleiding (30 pagina's), Gebruikershandleiding (29 pagina's), Handmatig (44 pagina's), Snelstarthandleiding (2 pagina's), Korte handleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Herconfiguratiehandleiding (2 pagina's), Snelstarthandleiding (6 pagina's), Handmatig (22 pagina's), Aan de slag (2 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (48 pagina's), Gebruikershandleiding (40 pagina's), Snel aan de slag (2 pagina's)

Upload

your

license

file you

received from Cisco onto the CUCM. For details on how to obtain the license file from Cisco, see the Appendix.

Download the license file to your computer.

Access https://CUCM-ip-address/cmplatform/, where CUCM-ip-address is the IP address of the Unified CM.

Navigate to Software Upgrades -> TFTP File Management -> Upload file.

Select the license file and upload the file.

Restart the TFTP Service on the Unified CM

Note: If you previously uploaded a license file for Enterprise to MPP conversion with MAC.lic (00CCFC123456.lic) name,

you may want to use a different name for the MPP to Enterprise conversion license file, for example MAC_M2E.lic

(00CCFC123456_M2E.lic).

Determine the IP Address of your MPP phone. Press Applications

Type the following into your web browser:

In your web browser, navigate to Voice -> Provisioning.

Scroll down to "Firmware Upgrade" and paste the following into the "Upgrade Rule".

Upgrade Rule:

http://CUCM-ip-address:6970/sipxxxx.TLexM2E-11-2-3C-12.loads

Note: This is the path to the MPP-2-Enterprise transitional load. The transitional load is restricted from registering to call control.

This transitional load is an intermediate step to validate that the device is authorized to move from an MPP load to an Enterprise

load through the use of a license file.

Example:

Note: You can monitor the status of the upgrade via Info -> Download Status -> Firmware Upgrade Status to validate if there

are any errors with the download. In a few moments the phone should reboot. You can also check Info -> Status -> Phone Status -

> Upgrade Status for additional information.

7832

8811/41/51/61

MPP to Enterprise

8832

8845/65

http://ip_address_of_phone/admin/advanced

sip7832.TLexM2E-11-2-3C-12.loads

sip88xx.TLexM2E-11-2-3C-12.loads

sip8832.TLexM2E-11-2-3C-12.loads

sip8845_65.TLexM2E-11-2-3C-12.loads

and select Settings -> Status -> Network Status -> IPv4.

where sipxxx is the filename from Step 3

Page 14 of 30