Epson EB-435W guide Handleiding voor snelle installatie - Pagina 3
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Epson EB-435W guide. Epson EB-435W guide 4 pagina's. Interactive unit
Ook voor Epson EB-435W guide: Specificaties (6 pagina's), Gegevensblad (2 pagina's)
Pagina afdrukken
Getting Ready to Use the Interactive Unit
❏
Install the Easy Interactive Driver
Turn on the computer.
a
Insert the CD labeled "Epson Projector Software for Easy Interactive Function" in your computer.
b
Follow the on-screen instructions to install the software. When installation is complete, click
c
to close the installation screen.
❏
Install the Easy Interactive Pen Batteries
Remove the battery cover by pressing down on the tab, and then install the two batteries.
a
To reattach the battery cover, press the cover until you hear it click into place.
b
❏
Connect to a Computer
Connect the projector's VGA computer cable to the computer's monitor out port.
a
Connect the Interactive Unit's USB cable to the computer's
b
❏
Adjust the Position of the Projection Screen (Calibration)
You need to perform calibration to match the position of the Easy Interactive Pen to the position of the
mouse cursor on the projection surface.
By performing calibration, the computer can accurately detect the position of the Easy Interactive Pen on the
projection surface.
Launch the Easy Interactive Driver.
a
For Windows
Select Start - All Programs (or Programs ) - Epson Projector - Easy Interactive Driver .
USB port.
Finish