Cisco 8851 Handmatig - Pagina 29

Cisco IP Phone Accessories

Where:

sd= speed dial

cp= call pickup

You can also enable busy lamp field only with call pickup or speed dial. Enter the string in the following

format:

fnc=blf+cp;sub=xxxx@$PROXY;usr=yyyy@$PROXY

fnc=blf+sd;sub=xxxx@$PROXY;usr=yyyy@$PROXY

You can also configure the parameter in the configuration file (cfg.xml) by entering a string in the following

format:

<Unit_1_Key_2_ ua="na">fnc=blf;ext=3252@$PROXY;nme=BLF_3252</Unit_1_Key_2_>

Step 5

Click Submit All Changes.

Enable the User to Configure Features on Key Expansion Module Line Keys

You can enable the user to configure features on the line keys of the key expansion module. The user can then

add any of the configured features to the dedicated line keys. For the supported features, see

Features on Line

Before you begin

• Access the phone administration web page. See

• Ensure that the line keys of the key expansion module are not in the Inert mode.

Procedure

Step 1

Select Voice > Att Console.

Step 2

In the General section, configure the Customizable PLK Options parameter with the codes of your desired

features defined in

Example: You configure this parameter with

a long-press on a key expansion module line key. The feature list looks like:

1 None

2 BLF presence

4 Menu shortcut

3 Do not disturb

The user can then select a feature or a menu shortcut to add to the line key.

You can also configure this parameter in the configuration file (cfg.xml) with a string in this format:

<Customizable_PLK_Options ua="na">blf;shortcut;dnd;</Customizable_PLK_Options>

Enable the User to Configure Features on Key Expansion Module Line Keys

Keys.

Configurable Features on Line

Access the Phone Web

Keys.

. The user can call up the feature list with

blf;shortcut;dnd;

Cisco IP Phone Accessories

Configurable

Interface.